TPT January 2008

For ERW-lines, Linsinger manufactures strip edge milling machines for longitudinal seam tubes (HF-lines up to 24"), and multi- cut tube cut-off machines for longitudinal edge tube lines (up to Ø 600mm tube). In the area of seamless pipes, the company offers carbide circular sawing lines for steel billets and single tubes (up to Ø 630mm), and multiple tube layers (up to 1,250mm width). The company also produces carbide circular saw blades for forging mills (steel billets up to Ø 630mm). Linsinger produces carbide saw blades and miller only for Linsinger machines.

Magnetic Analysis Corp USA Stand D45

Magnetic Analysis Corporation will present its range of eddy current, ultrasonic and flux leakage nondestructive test systems. MAC’s Echomac ® FD-4 ultrasonic rotary test system will be exhibited, along with the new MultiMac™ multi-mode eddy current instrumentation. The company’s test systems are designed to test tube, rod, wire and bar during production. The rotary eight channel Echomac ® ultrasonic system can be configured to detect surface and subsurface defects using shear waves, and internal defects and dimensional measurements, including wall thickness, using compression waves.

In Europe, the company also offers a full re- sharpening and repair service.

MFL is an expert in the field of machining and supplies both turnkey plants and individual machines for modernising and increasing the capacity of pipe production units. › The HK 1200 L-132 model of sawing machine from MFL

Website : www.linsinger.com

Œ

Website : www.mfl.at

Outstanding Tube Mill Cutoff Systems and Tooling

Linsinger GmbH Austria

Stand TBC

New-Variable Speed Shear Improves Performance

Linsinger Maschinenbau, Austria, is the manufacturer of an advanced range of sawing and milling machines. Equipment for large pipe includes plate edge milling machines for welding edge preparation, and pipe bevelling machines for bevelling both ends simultaneously on pipe up to Ø 60". For spiral pipe, the company supplies strip edge milling machines for spiral steel tube lines using coil up to 2,000mm width and 1" sheet thickness. fi A plate edge milling machine (PFMR OV ZLL 300)

Nick ‘N’ Shear ® Dimple Free Tooling Single Cut Die Sets Die Jaws Blades

Outstanding Tube Mill Cutoff Systems P.O. Box 334 • Troy, Michigan 48099 USA

Voice 248-853-0446 • Fax 248-853-6353 E-mail: brsales@betaram.com • www.betaram.com

›

69

www.read-tpt.com

J anuary 2008