TPi September 2018

Business & market news

WRAS approval for mag flow meters

Bell Flow Systems promotes all three of the approved models, which are manufactured by Badger Meter USA, and acts as exclusive distributor in the UK. The M1000 range is available for water measurement in sizes up to DN200, with a large selection of options including power, outputs, liner materials and electrodes. The higher-accuracy M2000 mag meter range for water measurement in sizes up to DN600 (WRAS-approved to DN200) is available with internal data logger and a similar range of options. The M5000 range of battery-powered mag flow meters is available for water measurement in sizes up to DN600 (WRAS-approved to DN200), with options including MID/OIML custody

The M1000, M2000 and M5000 mag meter ranges fromBadger Meter are now WRAS-approved for measuring potable water to comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. WRAS approval is also accepted in other countries throughout the world as a safety standard. The purpose of WRAS is to contribute to the protection of public health by preventing contamination of public water supplies and encouraging the efficient use of water by promoting and facilitating compliance. WRAS represents the UK water supply industry as one voice on the water fittings regulations and contributes to the development of relevant guidance, codes of practice and standards.

M5000 battery-powered mag flow meter

transfer approvals, meter verification tool and various power, output and connection options.

Bell Flow Systems Ltd – UK sales@bellflowsystems.co.uk www.bellflowsystems.co.uk

Beaver 16 CB, machine for CNC cutting and beveling pipes. Purpose : CNC pipe cutting and beveling in one operation Process : makes one cut and two bevels in one process Machine range : from O.D 60 to 410 mm (from 2” to 16”) Wall thickness : up to 80 mm Controls : automatic cycle: electrical clamping, feeding and pipe stop. Software : CNC controlled by FANUC Machining : single point machining process Pre-setting : pre-setting all your bevel shapes according to DIN / AMSE standard. Tooling : automatically adjusted by CNC to get right bevelshape /angle. Touchscreen : all controlled over a touchscreen Feeding : radial and axial feeding CNC PIPE CUTTING AND BEVELING IN ONE OPERATION

Copier Bevelmachines is the manufacturer and engineer of the Beaver 16 CB, we have different models for different pipe diameters. All the machinery that Copier Bevelmachines manufactures are for the pipe fabrication or the pipe end working market. Go to our website www.bevelmachines.com and www.endworking.com to get more information about our machinery.

COPIER BEVELMACHINES Giessen, The Netherlands | +31-(0)183441313 | sales@bevelmachines.com

s o l i d , s h a r p a n d s t a t e - o f - t h e - a r t

w w w . b e v e l ma c h i n e s . c om

11

www.read-tpi.com

September 2018 TUBE PRODUCTS INTERNATIONAL