TPi September 2013

NDT systems at Tubotech and Tube SE Asia

7th International Trade Fair for Tubes & Pipes, Valves, Pumps, Fittings and Components

Non-destructive test instruments and systems from Magnetic Analysis Corporation (MAC) will be exhibited at the Polimeter Comércio e Representações Ltda stand (912) at Tubotech in São Paulo, Brazil, 1-3 October. Polimeter is MAC’s representative for Brazil, Chile and Argentina. MAC will also be at this year’s Tube Southeast Asia show (17-19 September) at stand P35, co-exhibiting with its Thai representative, Siam Charn Co, Ltd. MAC offers three different test technologies: eddy current, ultrasonic and flux leakage. By combining eddy current and ultrasonic technology, for example, superior test results can be obtained as each technique detects the conditions that it is best suited to find. Applications include inspecting welded and seamless tubes for automotive applications as well as oil country tubular goods (OCTG) with or without upset ends. Both ferromagnetic and non-ferromagnetic materials can be successfully tested.

1–3 October 2013 Imigrantes

Information on the MultiMac ® eddy current, Echomac ® FD-5 ultrasonic, and Rotoflux ® flux leakage test instruments

and systems will be available at the trade shows. The versatile MultiMac with up to eight test channels can be used to detect transverse, non-continuous and/ or longitudinal, seam- type surface defects.

Exhibition Centre São Paulo, Brazil

www.tubotech-online.com

Magnetic Analysis Corporation’s MultiMac SM with built-in touch screen monitor

The Echomac FD-5 instrument features

up to 32 independent test channels, and provides flaw detection, and measurement of wall thickness, ID, OD, ovality and eccentricity. It can be used with MAC’s rotating transducer units as well as with new or existing immersion, squirter and other couplant type installations. The Rotoflux tester is available for transverse and longitudinal flaw detection. With 48 channels, the Rotoflux systems meet demanding industry standards for heavy wall OCTG tube. A recent system for a tube mill has the capability of testing to within 1" from the tube end. A range of mechanical handling, test coil platforms, automated controls, reporting capabilities and electromagnetic comparators are also available from MAC.

Held in conjunction with:

Supported by:

In co-operation with:

Messe Düsseldorf GmbH Postfach 101006 _ 40001 Düsseldorf _ Germany Mrs Claudia Wiechert Tel. +49/211/4560-7700 _ Fax +49/211/4560-7740 WiechertC@messe-duesseldorf.de www.messe-duesseldorf.de

Magnetic Analysis Corporation – USA info@mac-ndt.com www.mac-ndt.com

46

Tube Products International September 2013

www.read-tpi.com

TUBOTECH 2013 Anzeige 87x260mm.indd 1

25.06.13 08:33