TPT March 2018

T E CHNOLOG Y

Eddy current and ultrasonic non-destructive testing

with other CMS equipment, such as magnetising units, rotating systems or support coils, and can be installed together in a strong control bench including centring devices. Supervision software allows the display of combined signals (UT/ET) and creation of inspection reports that can be used as control evidence for quality services and customers. Stored data can be recalled for analysis and quality treatment. All the systems meet quality standards such as API, ASTM and DIN. CMS will exhibit at Tube Düsseldorf from 16 to 20 April at stand 6G18. Contrôle Mesure Systèmes – France Email: commercial@cmseddyscan.com Website: www.cmseddyscan.com

CONTRÔLE Mesure Systèmes (CMS), a specialist in non-destructive testing methods, offers a large range of non- destructive testing equipment, with a particular focus on tube inspection, on- or off-line, in ferrous or non-ferrous metals. The two main CMS products are RotoETscan eddy current rotating heads for tube inspection in a 1 to 220mm diameter range, for surface, subsurface and punctual flaws detection; and RotoUTscan ultrasonic rotating heads for tube/bar inspection in stainless steel, titanium, zirconium, or carbon steel (6 to 250mm diameter range), for longitudinal and transversal defect detection, thickness measurement, OD, ID and ovalisation. These rotating heads can be combined

RotoETscan eddy current rotating head for steel tube inspection

Visit us at TUBE Düsseldorf 16. - 20. April 2018 Hall 6 - Booth G29