TPT March 2018

HANDL I NG & LOG I S T I C S

Torque limiter type ECA for belt drives APPLICATIONS of torque limiters can be found in all sectors, in each machine or facility where torques have to be limited to protect machines or products from overload. They were chosen because heavy switching elements could considerably increase the (static adjusted) disengagement torque in case of a dynamic collision and therefore also the destructive collision forces.

Seventeen design sizes make a total torque range of 0.5 to 470 Nm overall. The ECA forms a compact unit together with a crown gear, and it is deliverable in diverse versions (with keyway or conical bush). The ECA is significant because it is one of the smallest torque limiters available.

The torque limiter type ECA, which is especially engineered for belt drives, prevents such overload damage or at least reduces it to a minimum. Particular value was put on compulsion-cutting and fast switching functions. Simple, light elements avoid adverse dullness of mass or switching.

Contrary to conventional friction clutches, the ECA has a very high re- peatability of the adjusted disengage- ment torque. It is free of clearance and self-reliantly re-engages after one turn. The movement of switching can be sampled by a proximity switch.

ENEMAC GmbH – Germany Email: info@enemac.de Website: www.enemac.org

Vacuum lifting system THE Starlift vacuum system from Acimex handles tubes, pipes (concrete, steel and cast-iron), tanks or any other cylindrical device.

security. Quick and efficient installation also increases productivity.

A rubber gasket ensures a soft touch without leaving any marks or deformation of the pipes. A single operator carries out both driving and remote handling operations on either an excavator or a forklift crane. Remote control ensures 100 per cent

Acimex – France Fax: +33 2 4737 1366 Email: contact@acimex.net Website: www.acimex.net

Handling by suction cups is a safe way to move products without any mechanical contact.

See us at Tube Düsseldorf at Booth D-20 Hall 6

WELDED TUBE MILL LINES

AUTOMATIC SLITTING LINES

www.athader.com

www.bonak.es

Ultra Precision Slitting Heads to obtain high quality Slits. Automatic Tooling Change Systems to increase the productivity. Automatic Recoiling Tension Control for high quality output strips. Camber & Shape Corrector System.

High Precision Tube Mills to obtain maximum quality Tubes. Quick Roll Change Systems. Double/Single Flying Shear Cut Off . Automatic Packaging System.

HR, CR, EG, GI, P&O, Prepainted, Stainless Steel and Aluminum.

HR,CR, Galvanized, Stainless Steel and Aluminum.

Slitting Lines Cut-To-Length Combined Lines Multiblanking Packaging Lines Special Lines

High Quality Tube Mills Rolls Design Bonak Servicing all 300 installa- tions worldwide.

Min./Max. Thickness Max. Strip Wide Max. Coil Weight Max Processing Speed Max. Plates production

0,1 ÷25mm 2600mm 500mpm 160 p/min. 45T

Strip Thickness

0,8 to 7,11mm 35 to 580 mm 12 to 178 mm 160 m/min. Cold/Friction Saw

Strip Wide

Tube Diameters Max. Line Speed Cutting System

References: ARCELORMITTAL, GERDAU, MITWALLI STEEL PRODUCTS, FORTACERO, ACERINOX, TERNIUM-SIDERAR, TATA STEEL, BLUESCOPE

References: THYSSEN, CONDESA, CHINCHURRETA, TUBOS ARANDA, FERPINTA, VH, IPAC, ROOFINGS LTD.

110

www.read-tpt.com

MARCH 2018