TPi March 2018

products & developments

Pipe fusion for larger polypropylene pipe The new McElroy Acrobat 315 helps meet the demand for larger polypropylene pipe fusion capability up to 315mm (12") while offering low- and high-force options for polyethylene pipe. It functions as easily indoors in tight workspaces as it does outdoors in small trenches. thinner-walled pipe; and high force, for fusing in high-drag and vertical applications. Both allow the operator to pre-set the facing, heating and fusing pressures.

“We’re excited to offer a design with such broad appeal and are working diligently to build on these innovations as we grow the Acrobat line for larger pipe sizes,” said Jason Lawrence, director of product development at McElroy.

The facer design features a motor and gear reduction, which creates a lightweight, compact assembly that is balanced for use in many orientations. It also has a trigger-released lock to secure it in the carriage during use. The carriage converts from four to three jaws to further reduce the size of its footprint, and narrow jaws allow fusions to most flanges and fittings. A light- weight heater and guide rod latching system help reduce operator fatigue. CompatibilitywithMcElroy’sDataLogger ® makes it possible to record joint data for analysis, with added assurance that joints were fused properly. McElroy – USA fusion@mcelroy.com www.mcelroy.com

The compact, lightweight machine caters to the HVAC, plumbing and mechanical industry as well as underground/construction.

The Acrobat 315 is a versatile machine for the polyethylene industry; it can be paired with two different hydraulic power units (HPUs) to meet the maximum system pressure desired. There are also two options for carriage pressure configurations: low force, for fusing in low- drag situations or with

McElroy’s Acrobat 315

Jingning Junwen Steel Co., Ltd

Stainless Steel Seamless Pipe / Tube Type:

Stainless Steel Cold Drawn Seamless Tubing in Coils & Pipe Coils (Made of Cold-Drawn Pipe Billet Instead of Plank-Welding) Type: Austenitic stainless steel seamless pipe Process Method: Cold Drawn / Cold Rolled Surface Finish: Bright Annealed Grade: TP304, TP304L, TP316 / 316L Dual Grade Standard: ASTM (ASME) SA / A312 / A213 / A269 and DIN, GB, JIS Size: OD 3 / 16 "-1" (4.76mm-25.4mm), WT 0.028"-0.083" (0.7mm-2.11mm) Tolerance: Outer Diameter: ±0.08mm (0.00315"), Wall Thickness: ±10% Length: 100ft-2,000ft, or according to customers’requests Certification: ISO9001:2000,GB/T19001-2000

Austenitic stainless steel seamless pipe

Process Method: Surface Finish:

Cold Drawn / Cold Rolled

Bright Annealed / Pickling / 180# 240# 320# 400# 600# Manual Polished / Mechanical Polished

Grade:

TP304, TP304L, TP316 / 316L Dual Grade.

Standard:

ASTM (ASME) SA / A312 / A213 / A269 and DIN, GB, JIS

OD 3 / 16

"-1 1 / 2

" (6mm-38mm), WT 0.028"-0.118" (0.7mm-3mm)

Size:

Tolerance: Certification:

Outer Diameter: ±0.08mm (0.00315"), Wall Thickness: ±10%

ISO9001:2000, GB/T19001-2000

Our products are widely used in petrol, chemical, pharmacy, foodstuff, machinery, aerospace, military, hardware, boiler gas, hot-water heating parts, shipping, power and other industries, heat-exchangers and cold treatments for chemical industry, and gas transmission pipelines. We can offer stainless steel pipes according to our customers’ requirements.

No. 88 Shiniu Mountain, Jingning, She Autonomous County, Zhejiang, China Salesman: Sam | Mobile: +86 13305889498 | Tel: +86 578 5973358 | Email: jw.sam@qq.com

www.pipe-coil.com

44

TUBE PRODUCTS INTERNATIONAL March 2018

www.read-tpi.com