EuroFasteners March 2020

Products

Belleville spring washers in 300 series stainless steel

• Adjust the load and de ection of a washer stack by adding or removing individual washers and/or the sequence in which they are used, whether in series or parallel Stacks of washers can thereby provide a signi cant damping action in parallel stack con guration by reason of friction induced hysteresis, which dissipates unwanted energy, for example in architectural systems. They o er the ability to provide further adjustment by swapping out varying thicknesses in a stack to tune the force or compression range – also by mixing and matching of parallel/series spring discs. Belleville spring washers are similar in operation to wave washers as an anti-vibration device when installed with machine screws – but o ering higher load capability. They can be useful for o ering a visual indication of relaxation in a joint, over time or under adverse conditions. Lee Spring www.leespring.com

•

Single: One washer

Lee Spring is o ering Belleville spring washers in a wide range of di erent sizes and loading capacities. Manufactured in 300 series stainless steel, they enable engineers to quickly source these compact and cost-saving components on an urgent or a programmed supply basis. The high-performance spring washers found early application in rearms and now are widely found in aerospace, automation, building industry and elsewhere because of their ability to support very large loads with minimal use of space and to provide variable performance characteristics by varying their assembly format. Belleville washers are a type of spring shaped like a washer – named after Julien Belleville who in 1867 patented the design on which these modern versions are based. They are also commonly referred to as a coned-disc spring, conical spring washers, disc spring, Belleville spring or cupped spring washers. By stacking Belleville Washers in various con gurations, additional load exibility can be achieved in four di erent ways:

• Parallel: All washers stacked the same way • Series: All washers stacked opposite each other • Series-parallel: A combination of the two A single Belleville spring washer has a speci c load for a given de ection. Two washers stacked in parallel will yield double the load of a single washer for the same de ection; three washers will yield triple the load; four washers will yield four times the load, and so on. Alternatively, two washers stacked in series will yield double the de ection of a single washer for the same load; three washers will yield triple the de ection; four washers will yield four times the de ection, etc. combinations therefore can provide a wide variety of combined results of load versus de ection for the stack. Consequently, depending upon the application, the designer can: • Stack in ‘parallel’ to increase load • Stack in ‘series’ to increase de ection Various series-parallel

▼ Belleville spring washers are available in a wide range of sizes and loading capacities from Lee Spring

EF 7/89

www.read-eurofasteners.com

March 2020