EoW March 2008

wire

31 March-04 April

productivity. The system can be expanded to accommodate any number of spools. Yield Management Corporation – USA Fax : +1 413 283 7778 Email : sales@yieldmanagementcorp.com Website : www.yieldmanagementcorp.com

Wyrepak Industries Inc 09 E36

Wyrepak will display its line of rotating cap and brush assemblies designed to pay off wire at line speeds up to 3,000 feet per minute. If more tension is needed, the line of manual and electronic tension capstans can be added. Also featured will be the company’s expanded line of guide pulleys.

Zumbach Electronic AG 11 D43

The machine heads or extrudes the part and the grippers open. VEM models are available with a heading force of 15 tons to 150 tons and strokes up to 200mm. Also on display will be the fully automatic M- 24 (1") u-bolt machine, working from wire coil, model VAS-35-BBQ, with the new adjustable bending die. The thread range is from M-12 to M-24 in mild steel or stainless steel, giving production rates of 70 bent bolts and 140 straight studs per minute. The VAS-35-DBQ is equipped with hydraulic clamping of the threading dies and a process control system that also controls the cut- off length. The machine is equipped with a hand magazine. A planetary dual-spindle thread roller with a closed structure, model VA-20/20-ESS, for straightening and thread rolling of hi-tensile fasteners performs two rolling operations, one after the other, and can be used for straightening and threading or dual threading of fasteners. The machine is equipped with a ‘controlled introduction’ system, for rolling lap-free threads on any material hardness. Other features include hydraulic clamping of the thread rolling dies and quick set-up features. Thread range up to M-16. Production speed up to 640 PPM. Chamfer cutting machine, model VCM, demo unit will show the new Videx chamfer machine capacity and flexibility. Videx will demonstrate a dual spindle chamfer and turn machine which is servo controlled and operated. The VA20/20-ESS for thread rolling of hi-tensile fasteners ▲

Wyrepak Industries Inc – USA Fax : +1 860 632 5775 Email : info@wyrepakind.com Website : www.wyrepakind.com

Zumbach will present many new develop- ments and products.

Videx Machinery Ltd 13 A65

The VEM-15/30 hand feed cold former that will be demonstrated extruding the ends of pre-cut steel bars is part of a line of cold formers for small production batches with one or two stations. The operator feeds the bar into the machine until reaching a positive stop when the grippers close on the bar and the stopper retracts.

Sensors: the advanced ODEX® 10 concentricity and diameter gauge for wire extrusion is an extremely accurate and advanced sensor, insensitive to environmental conditions. A fully non- contact, based on magnetic and laser technology New laser based diameter gauges for very big cables and profiles 3-axis laser diameter gauges with incorporated fault detection Ethernet TCP/IP enabled diameter gauges for direct networking without the need for external processors New ultrasonic scanners of the novel UMAC® for wall thickness measurement provide quick and easy adaptation to cable diameters and space-saving integration Data acquisition, processing and display units (processors) A full programme of USYS processors, ranging from the low-cost basic model up to the high-end multi-sensor processor/ controller All USYS processors are extremely user- friendly, safe, stable and flexible for extension and upgrading Complete measuring and control systems, including new systems for full process monitoring and control will be shown, such as: Rayex, the new line of x-ray wall thickness eccentricity systems for CV lines. The main new features are: very economic pricing, advanced hard and software with easy operation and powerful control functions and data acquisition Wallmaster, wall thickness and eccentri- city systems for cable jackets and diacal option for fully automatic calibration and control Cellmaster®, Jacketmaster and Multiline systems for extrusion and wire-drawing based on the new USYS line Zumbach Electronic AG – Switzerland Fax : +41 32 356 0430 Email : sales@zumbach.ch Website : www.zumbach.com • • • • • • • • • • • Variety of the numerous successfully operating ODEX® measuring system ▲

Videx Ltd – Israel Fax : +972 3 536 4802 Email : videx@videx.co.il Website : www.videx.co.i

Yield Management Corporation 9 D14-04

YieldManagementCorporation,Massachusetts, USA, has introduced a new spool run out detector for tubular stranding and planetary cable machines. The new model optically monitors individual spool rotation and can initiate a machine stop within 8 rotations of the barrel after a spool has stopped rotating. The new model detects both empty spools and broken wire and can significantly re- duced finished goods scrap while increasing

204

EuroWire – March 2008