wiredinUSA February 2013
INDEX
jacketing system that enables the cable to move along the duct at a faster speed. Fiber types include single-mode, OM2, OM3 and OM4 employing bend insensitive fiber technology, and in fiber counts up to 48. All eABF products incorporate a low- contact, ribbed inner surface and ultra-low friction Silicore ® lining for low drag, high-velocity cable jetting channel within the duct. The eABF cableduct combination also allows for installations up to 1,000 feet without using air. General Cable and Dow Electrical & Telecommunications have introduced BICC ® brand EmPowr ® Link+, an enhanced water tree-retardant cross-linked polyeth- ylene (TRXLPE) insulated medium-voltage cable. EmPowr Link+ underground medium- voltage cable is said to provide longer service life and the potential for a lower total system cost. EmPowr Link+ utilizes the Dow Endurance™ HFDC-4202 EC insulation compound, which offers enhanced dielectric performance with improved water tree-retardant technology, and is coupled with advanced conductor and insulation shield technologies Cable alliance
that help reduce electrical stress and enables easier accessory installation over a broader temperature range. These components, combined with exceptional material processing and cable manufac- turing capabilities, deliver a medium- voltage cable designed to provide extend- ed cable life over existing TRXLPE cables.
president and general manager of General Cable's electrical utility business.
measurement of the crimp pull strength on a wide range of wire sizes and termi- nals including crimped, soldered or solder- less. It comes with multiple power plugs and a digital output that displays measure- ment settings in pound force (lbf), kilogram force (kgf) and Newton (N), making it ideal forglobal use. It is suppliedwithACrecharge- able adapters for 120V and 230V AC power supplies and a calibration certificate (NIST). Make sure your new mach i ne or pr oduc t receivesall thepublicity it can get! Send us the details and a photograph for our new Products, Machines & Technology section in wiredInUSA. To make sure your editorial is published in the March edition – send us the details by 22 nd February
Wire crimp tester
Molex Incorporated’s new hand-held wire crimp pull-force tester delivers digital pull-force readings to verify crimp quality. It will operate on a wide range of crimped terminals and wires, providing consistent verification of crimp pull force and reducing potential quality issues. “Our hand-held wire crimp pull-force tester can be used in any situation requiring a portable solution to verify crimp quality,” said Bob Grenke, product manager, Molex.
All editorial should be sent to editor David Bell at david@wiredinusa.com
The hand-held wire crimp pull-force tester from Molex comes standard with both a wheel-type clamp featuring multiple slot sizes for wire diameters up to 6.35mm and a clamp-style holder for open-barrel products.
You can now get all the latest news daily by becoming our friend on Facebook or following us on Twitter
“Backed by the General Cable–Dow Inside alliance, EmPowr Link+ delivers reliable power that allows our utility customers to lower operating costs and ensure an expected system lifespan in excess of 40 years,” said Jay Lahman, vice
Follow us on twitter
Like us on Facebook
The manual hand-cycle lever automatically grips the wire, providing an accurate
wiredInUSA - February 2013
wiredInUSA - February 2013
54
55
Made with FlippingBook