WCA November 2020

Industry news First bar rolled on Kocks RSB 5.0 Korean special steel maker POSCO has commissioned its bar mill #2 incorporating a reducing and sizing block (RSB ® ) 370++/5 in 5.0 design by Friedrich Kocks GmbH & Co KG. The Kocks RSB 5.0 finishes round dimensions of Ø 14 to 55mm but also produces flexible feeders for the wire rod line. The new RSB replaces an existing Kocks block that had been in operation since 1995, producing more than 12.5mn tons of round SBQ grades for the automotive industry. Apart from the RSB 5.0, the scope included the size control system (SCS ® ), which allows real-time adjustment of the operating parameters of the rolling block, and the light section measuring gauge 4D Eagle ® . Friedrich Kocks GmbH & Co KG www.kocks.de

Supermac high speed building wire line

Supermac specialises in the following areas: • State of the art CCV Line with Scholz Vulcanization system for power cables up to 132 KV XLPE and 33 KV for rubber • Specialized medical tubing extrusion lines • Proven triple extrusion line for SIOPLAS (XLPE) cables • High speed insulation line and sheathing line for house wiring & control cables and the medical equipment sector • High output and best in class insulation line and sheathing line for power cables • HCV insulation and sheathing line • Hybrid and composite CCV lines for both XLPE and rubber • Rubber extruders for insulation and sheathing materials • Silicone extrusion lines with infrared vulcanization system • Extruders for variety of applications – up to 175 mm • Cross-Head Single/Dual/Triple • Haul-Off Caterpillar • Capstan • Take-up and pay-off of all types and sizes and as per requirement above 4.5 meters and 40 MT

❍ ❍ Kocks RSB 370++/5 with SCS and 4D Eagle measuring gauge

www.supermacindia.com

SUPERMAC INDUSTRIES (INDIA)LIMITED OFFICE : A-28&29,NARAINA

UNIT-I : PlotNo-2,Sector-6, IMTManesar, GurgaonHaryana, INDIA Ph.:+91-0124-4690500 Fax:+91-0124-4690501 E-mail: jasvinder@supermacindia.com vkohli@supermacindia.com

IndustrialArea Phase-1,New

UNIT-II : PlotNo.18-19, Sector-2A, IMT Manesar, Gurgaon,Haryana, INDIA

Delhi-110028, INDIA Ph.:+91-11-45574317 E-mail: office@supermacindia.com

Rolf Schlicht GmbH

Stand: 12 A48

Rolf Schlicht GmbH’s RSC-NG powder coating machine, from the RS Powdertech series, was launched as the successor to the RS Powdertech type PBA/RSC machines. The modular system enables adaptation to the specific purpose of each customer. The company is now launching another new development, with models from the Talkator NG series. The Talkator NG SPC is suitable for cables, hoses, wires and profiles. The model is located below the RSC NG line, and shows its strengths in slow, simple cable production as well as in the production of strands and profiles in the extrusion sequence in the rubber industry. The Talkator NG DR (drum roll) is used in the powdering of rubber-moulded part production or within granulate

production, with fine coatings being achieved. Using the newly developed RS filter system, dust-free powdering is possible, as with the long-standing PBA/RSC/RSC NG machines. Rolf Schlicht GmbH www.schlicht-gmbh.de

❍ ❍ Talkator NG SPC from Rolf Schlicht

15

www.read-wca.com

Wire & Cable ASIA – November/December 2020