WCA March 2017

Industry news

Specialists in straightening and cutting machines

❍ Delisi – specialist manufacturer of automatic straightening and cutting machines for smooth and ribbed wires

DELISI Srl specialises in manufacturing automatic straightening and cutting machines for smooth and ribbed wires from 1 to 20mm in diameter. Its machines are characterised by rapid change of diameter, rapid change of the lengths and fast set up: about one minute, to change the diameter to work. The spinner is supplied with a straightening unit of pre-regulated jaws for each diameter of wire to work: it is enough to install the suitable straightening unit according to the wire to handle, and the spinner will be ready to work without waste of time and material. The straightening jaws can be in polyamide for aluminium and copper wires; in bronze for aluminium, drawn steel stainless steel wires; in cast iron for drawn wires; in cast iron with carbide inserts for drawn, laminated and ribbed wires; or in integral carbide for drawn, laminated and ribbed wires. They can also be in Teflon or wood to fit them to the customer requirements. The wire in the spinner is straightened through a series of bends that do not damage it while it is moving. With the flying cut, the shears run during the cut. After finishing the cut, they quickly return back to the starting point, without the wire stopping. For a high number of short cuts, as for example when working electrodes, Delisi can supply the machine with a continuous cutting disc, so the cutting speed is higher and the maximum production of 400 pieces per minute can easily be reached. On request, the machines can be supplied with electronic programmer and different types of pay-offs and rod collection beds and other special devices. Delisi Srl – Italy Website : www.delisisrl.com

18

www.read-wca.com

Wire & Cable ASIA – March/April 2017