WCA September 2015

wire Southeast Asia 2015

Bow Technology Stand: H36

Aeroel Srl Italian Pavilion

HWS 1 Handy Wire Scanner is a fully portable optical micrometer for non- contact measurement of wires, cables and other similar products. Developed by Aeroel with LED and CCD technology, it uses two crossed linear sensors to automatically compensate positioning errors (patent pending). Thanks to a powerful single chip micro- processor, the micrometer is linearised and compensated to obtain the maximum precision in the entire field of measurement, regardless of an accurate positioning of the wire.

With over 500 bow designs on offer (560 to 2,500mm, moulded, flat, closed- design, metallic, rod, special) available for more than 25 well-known brands of machines, the Bow Technology depart- ment of Gauder Group helps cable makers to optimise double twist machine operations.

The diamond coating is very thin, and it will not peel off as is the case of a thick coating, thus increasing the life of the die and providing better performance. This is evident by the responses of overseas customers who have used these dies for copper, aluminium, stainless steel, aluminium alloy, etc. Ajex will also showcase its new in-house models of diamond and carbide die polishing and grinding high speed machines and polishing accessories, a new range of masterlube lubricants for copper/alu/CO 2 , new pressure die K-340 for high and low carbon, cross heads, buncher bow, die polishing and grinding access. Ajex & Turner – India Website : www.ajexturner.com ❍ The range on offer from Ajex & Turner

❍ The HWS 1 from Aeroel

The measurement is started by pressing the trigger and takes only a few seconds, the display provides the operator with interactive information to place the wire in the useful measurement area and displays the measurement result. All measurements are saved in the memory of the scanner, associated with the date, time and the number of the machine. Through a USB connection, data can be downloaded to any PC. The battery is charged via the USB connector with the supplied power supply; battery life, with micrometer always active, is approximately four hours. Aeroel Srl – Italy Website : www.aeroel.it Ajex and Turner will be showing vitrified nanocrystalline technology for dies and tools, a completely new concept for wire drawing and compacting. This provides more wear resistance, giving an extremely smooth surface finish with very low friction. Dies offered are for a range of 0.8mm to 70mm for copper, aluminium, aluminium alloy, stainless or carbon steel wire, and provide a two to three per cent improvement in raw material use for metal savings. It holds zero tolerance for up to 500 metric tons (stainless steel and carbon steel wire up to 0.6%C) at a price that is lower than PCD dies (depending on bore diameter). Ajex & Turner Stand: B11

AWCMA Stand: D32

The division is the patent owner of the power saving and multi-use “GreenBow2” (one bow fibre, three wire paths, an exclusive design enabling up to 30 per cent energy savings on bow motori- sation), and recently launched “Basic Bow Technology”, a new range of Niehoff D631, Lesmo DTO-630 and Samp BM630 conventional bows. Bow Technology – France Website : www.bowtechnology.com ❍ Green bow technology from Bow Technology BWE’s Conklad 315 machine is based on the highly successful and well-proven Conform 315 model. The Conklad 315 is the smallest machine in the BWE Conklad range but incorporates many of the standard design features found on the larger machines, such as hydraulic shoe opening, feedstock shear, epicyclic gearbox and torque tube. The Conklad 315 operates in tangential mode, using a single infeed rod, for cladding and sheathing operations. The machine has been optimised for high efficiency production of: • Aluminium clad steel wire (AS wire) • OPGW and CATV cables BWE Stand: J08

The AWCMA – Austrian Wire and Cable Machinery Manufacturers’ Association – was founded in 1988 and consists of 20 member companies. All members are continuously involved in research and development.

AWCMA will actively take part at wire Southeast Asia with 11 of its member-companies present, all offering leading technology (hardware and software) for the economical production of wires and cables. The Austrian Pavilion in Bangkok, jointly organised with the WKO (Austrian Federal Economic Chamber), will host 12 companies in total and at the AWCMA stand. Information on Austrian companies and their products – particularly of non-exhibiting member companies – will be available. AWCMA – Austria Website : www.awcma.com ❍ Member companies of the AWCMA

➣➢➣

wire Southeast Asia – BITEC, Bangkok 16 th -18 th September 2015 82