WCA September 2015

Technology news

Pneumatic and battery driven roll pushers

move from 60 to 120 rolls with only a battery charge. The MRE Moviroll is provided with a second battery (optional). The plug and play batteries allow quick changes of the battery without interruption during operation. The intelligent charger autonomously decides on the duration of the recharge, depending on the state of the battery charge. Great importance has been given to the system design. The ergonomic handle and throttle have been designed in such a way as to simplify the Moviroll handling during both the forward gear and reverse gear. The throttle is equipped with a speed command that allows variable speed to suit any operator needs. The oversized rear wheels are designed to overcome obstacles such as holes, chains and shuttle cart. The battery Moviroll is available in three models, each with two different handle configurations (straight handle or curved ‘S’ handle). • Models MRE100/MRE100 S have a thrust force of 12,000N (26,450lb) and a lift force of 3,000kg (6,600lb) • Models MRE200/MRE200 S have a thrust force of 16,000N (35,300lb) and a lift force of 4,000kg (8,800lb) • Models MRE300/MRE300 S have a thrust force of 20,000N (44,100lb) and a lift force of 5,000kg (11,000lb) Renova Srl – Italy Website : www.renova-srl.it

RENOVA has introduced the new powerful and reliable Moviroll roll pushers – pneumatic and battery driven. Renova’s Moviroll systems allow the operator to effortlessly manoeuvre both large and small cylindrical loads on a flat surface and then place them on the roll stand shuttle cart. Compact, heavy-duty, fast and with low or no maintenance requirements, the new Moviroll roll pushers allow the movement of the load in a continuous and regular way and are suitable for handling wire and cable rolls, corrugated, paper and tissue rolls in a simple and safe manner. All Moviroll models are designed and made in Italy. Pneumatic model: The MR pneumatic Moviroll uses the power of a pneumatic gear motor that is powered by pressurised and lubricated air at 6 bar (90 psi). Two models, each with two different handle configurations (straight handle or curved ‘S’ handle) comprise the range: • Models MR100/MR100 S have a thrust force of 10,000kg (22,000lb) and a lift force of 2,500kg (5,500lb) • Models MR200/MR200 S have an increased thrust force of 20,000kg (44,000lb) and a lift force of 5,000kg (11,000lb) Battery model: The new MRE battery-powered Moviroll offers the advantage of free movement without the constraints of pneumatic connections or electrical cables. It is equipped with a 24V DC IP 44 sealed brushed motor powered by a 24V battery and a sophisticated electronic system that supervises the operating parameters of the motor and battery, and intervenes to safeguard the Moviroll when they exceed those eligible. In case of anomaly a flashing LED allows you to identify the problem and solve it. The high performance battery is housed in an 8mm chassis and ensures the operator to

❍ New Moviroll roll pushers from Renova

59

www.read-wca.com

Wire & Cable ASIA – September/October 2015