WCA September 2010

wire China 2010

Strecker’s product range includes: Buttwelding machines for all types • of wires, from 0.04mm diameter up to 55mm diameter for steel and 40mm diameter for solid non- ferrous wires. Welders are available with an automatic deburring cycle Annealing machines for steel • Buttwelders for stranded conduc- • tors from 0.08mm² to 2,000mm² Cold pressure buttwelders with • deburring cycle Machines for electrical parting or • buttwelding of steel cord or steel strands A new, table type, electric buttwelder for mild steel wires up to 14mm or copper wires up to 8mm diameter, is now available. August Strecker GmbH & Co KG was founded in 1933. It currently has about 68 employees and over 40 representative offices worldwide. New electric buttwelder for mild m m steel or copper wires

“ Apex 70001 和 70002 化合物的低温适 应性用来提供极冷环境下风力涡轮舱应 用中要求的冷弯和低温冲击性能。”电 线电缆行业经理 Mike Patel 说。“他们 在极端恶劣环境下的耐久性使电缆制造 商能够向可替代能源，如风能，提供快 速增长的市场。” Teknor Apex Company – USA/ 美国 Fax/ 传真 : +1 401 729 0166 Email/ 电子邮件 : vinyl@teknorapex.com Website/ 网址 : www.teknorapex.com Traxit (Tianjin) Chemical Co Ltd is a subsidiary of Traxit International GmbH, Germany, a lubricant supplier in the fields of wire drawing and rolling. Traxit China will offer many new products, including three new types of lubricant completely free of borax or any boron compound. CH 828 for PSC-wire drawing, suitable for use in all dies with high-speed drawing. CH 820 for low, high carbon and stainless steel drawing, designed for a very clean surface after drawing. CH 800 sodium soap, for an easily cleanable lubricant film on the wire surface. A feature of this product is the low formation of dust during drawing. Traxit (Tianjin) Chemical Co Ltd 是德国 线材拉拔和滚轧润滑剂供应商 Traxit International GmbH 的一个子公司。 Traxit China 将提供很多新产品，包括三 种新型的、完全不含硼砂或任何硼化合 物的润滑剂。 Traxit China. ......................... W1G21 CH 800 钠皂，是线材表面易清洗的润滑 油膜。本产品的特点在拉制过程中较少 产生粉尘。 Traxit (Tianjin) Chemical Co Ltd – China/ 中国 Fax/ 传真 : +86 22 2499 4777 Email/ 电子邮件 : info@traxitchina.com Website/ 网址 : www.traxit.com Troester GmbH & Co KG.................................W1F41 Troester is a worldwide supplier of machines and complete lines for the cable manufacturing and rubber 用于 PSC －线材拉制的 CH 828 适用于所 有的高速拉丝模具。 CH 820 用于低、高碳钢和不锈钢的拉 制，拉制后表面非常干净。

Teknor Apex Company........ W1G05 Teknor Apex will showcase two new PVC compounds, developed to withstand harsh conditions in wind turbine and other outdoor control and power cable applications. Apex 70001 and 70002 jacketing compounds exhibit low brittle points, –46ºC and –56ºC respectively, pass stringent tests for oil resistance and meet appropriate UL and CSA standards for flame performance. “The low-temperature flexibility of Apex 70001 and 70002 compounds provide the cold-bend and low temperature impact performance required in wind turbine nacelle applications in extremely cold environments,” says Mike Patel, wire and cable industry manager. “Their durability under extremely harsh conditions enables cable manu- facturers to supply the growing market for alternate energy sources like wind power.” Teknor Apex will showcase m m compounds for wind turbine applications

➣➢➣

新的电动对焊机，用于低碳钢丝或

❍ ❍

者铜线

Strecker 焊机，专为可靠性和性能而设 计，目前在很多国家和国际电线电缆厂 有很好的表现。公司大多数产品出口到 全世界 110 多个国家。 Strecker 的产品系列包括： 对焊机，适合所有线材类型，从 • 0.04mm 到 55 毫米直径的钢丝到 40mm 直径的实心有色金属线。焊机 有一个自动去毛刺循环。 钢丝退火机 • 对焊机，用于 • 0.08mm² 到 2,000mm² 的绞合导体 冷压对焊机，带去毛刺循环 • 帘线钢或钢绞线电动切锭机或对焊机 • 一台新型、电缆型、电动对焊机，用 • 于 14mm 直径的低碳钢丝或 8 毫米直 径的铜线，现也可用 August Strecker GmbH & Co KG 成立 于 1933 年。目前在全世界拥有约 68 个雇 员和 40 多个办事处。

Teknor Apex

将展出风力涡轮应用化

❍ ❍

合物

Teknor Apex 将展示两种新的 PVC 化合 物 , ，用于极端恶劣的条件下风力涡轮和 其他户外控制和电力电缆的应用。 Apex 70001 和 70002 护套复合物显示了 低温脆化性，分别为 –46ºC 和 –56ºC ， 通过严格的耐油性试验并满足适当的阻 燃性能 UL 和 CSA 标准。

August Strecker GmbH & Co KG – Germany/ 德国 Fax/ 传真 : +49 6431 44221 Email/ 电子邮件 : info@strecker-limburg.de Website/ 网址 : www.strecker-limburg.de

wire China 2010 – Shanghai New International Expo Centre 21 st -24 th September 2010 116