WCA May 2022

Exhibitors at wire 2022

Ravni Technologies ›››

RichardsApex, Inc

Moviroll roll pushers are compact but heavy duty, allowing agile handling of reels and carts. Intuitive and easy to use, they can be used without a licence and can operate in narrow spaces and where forklifts are not allowed. Each year, Renova’s technical team expands the range of material handling models based on customer feedback. Pneumatically and battery-operated models are available, along with a variety of options and accessories. Moviroll roll pushers allow the operator to move wire and cable drums or reels up to 50 tons, with a maximum roll diameter of 6m. Moviroll MR pneumatic roll pushers use a gear motor powered by pressurised and lubricated air at 6 bar. The compact dimensions allow them to separate two rolls when in contact, and the “S” curved handle allows the Moviroll to be used alongside the rolls to simplify handling. Moviroll MRE battery-driven roll pushers offer the advantage of free movement without the constraints of pneumatic connections or electrical cables. They are equipped with a 24V DC IP 44 or 48V DC IP 44 brushless motor powered by 24V or 48V lithium battery. For when working space is limited, the MRE L model is equipped with a tilting handle that allows the operator to work alongside the load, pulling it instead of thrusting it. The Moviroll MRE XS L battery roll pusher has lower weight and dimensions for operation in the smallest spaces. It is equipped with a 48V lithium battery and a 48V DC IP 44 brushless motor that require no maintenance and allow a wider speed range. The handle can be mounted at two heights – 850 or 920mm from the ground. Movicart battery-driven cart movers are designed to safely push or pull carts, on wheels or rails, without additional effort from the operator. They quickly engage up to 5,000kg thrust force. For operator safety, Movicart is equipped with an anti-crushing system. After placing Movicart under the cart, the operator can activate the lifter to hook the frame. In order to adapt to any type of frame, Movicart is provided with different cart gripper tools. The omnidirectional wheels allow the cart to change direction easily, even in narrow turns.

10 C17 Ravni Technologies has launched a new range of fully servo-controlled wire straightening and cutting machines. Brushless servomotors are used on all movements: feeding, straightening and cutting. Amongst the advantages, better efficiency is linked to the new generation of motors.

09 F06-05 RichardsApex, a global manufacturer of wet lubricants for the ferrous, non-ferrous and alloy wire and tube industries, will be displaying its latest technology. From wire drawing, tube drawing and hot-rolling applications, RichardsApex provides semi-synthetic, full-synthetic and straight oil form compounds for wet drawing of non-ferrous and ferrous wire, as well as protective coatings, cleaners and corrosion inhibitors for all non ferrous and ferrous alloys, for both wire and tube applications.

Ravni’s MDC30 straightening and cutting machine

Extensive work was carried out on the structure of the frames, which resulted in better acoustics. The ease of use of the Ravni machines was further enhanced with better ergonomics provided by the new HMI. The final result is more comfortable operation, and an increase in production rates with reduced maintenance. Ravni Technologies www.ravni.com 14 E34 Safety in a production plant is a priority, and manually moving heavy loads is inadvisable. Renova’s material handling systems allow the operator to safely and effortlessly manoeuvre both large and small reels or carts on a flat surface, reducing risks for the operator according to the Technical Standards ISO 11228 “Ergonomic Manual handling” part 2. This technical standard specifies the risks and the recommended limits for pushing and pulling activities carried out by an adult worker in an upright position, who applies force with both hands to move or stop an object. Renova Srl

RichardsApex provides compounds for wet drawing of non-ferrous and ferrous wire

The core products can be made at all of the company’s manufacturing locations in the USA, Europe, Australia and Mexico. An established global sales network services customers throughout the world, including on-site support and technical sales assistance. The company has subsidiaries in the UK (RichardsApex Europe) and Australia (RichardsApex AustralAsia), and representatives in Canada, China, Greece, India, Italy, Japan, Korea, Malaysia, Mexico, Peru, Poland, Russia, Taiwan, Thailand, Turkey, Venezuela and Vietnam. Many other countries are serviced by subsidiaries and representatives. RichardsApex, Inc www.richardsapex.com Roblon A/S 09 E42 With more than 60 years’ experience of developing fibre solutions, Roblon has obtained substantial know-how about the properties of fibres.

Renova Srl www.renova-srl.com

Moviroll MRE XS battery-driven roll pusher

60

www.read-wca.com

May 2022