WCA July 2015

Technology news

High accuracy helps to reduce manufacturing costs ❍ Measuring the length and speed of products during production to avoid costly product overages and shortages

have installed the LaserSpeed non-contact gauge on their production line to directly measure the length and speed of product. The LaserSpeed gauge uses advanced laser-based technology to precisely measure the length and speed of wire and cable during production without making contact with the product. This high-performance gauge projects a unique pattern on the surface of the product. As the product moves, light is scattered back to the LaserSpeed unit. This information is translated into product speed, and pulses are produced to determine the product length. Length and speed measurements are captured with ±0.05% accuracy and ±0.02% repeatability. NDC offers a complete line of LaserSpeed systems with measurement speeds up to 12,000m/ min (39,400ft/min) and down to the true zero speed, standoff distances up to 1,000mm (39.4"), and measurement depth of field up to 100mm (3"). NDC also offers a European certified length measurement system that meets MID (Measuring Instruments Directive)

NDC Technologies reports that its innovative Beta LaserMike LaserSpeed ® non-contact laser gauge enables wire and cable manufacturers to accurately measure the length and speed of products during production to avoid costly product overages and shortages, as well as reduce product scrap and rework. Manufacturers of wire and cable have applications where they need to tightly control the length and speed of product during production. Applications include continuous length measurement, differential speed control, cut-to-length control, product positioning, printing/marking control, and other demands. Most manufacturers depend on the accuracy of their drive speeds or mechanical contact encoders. However, mechanical encoders can lose contact on various product surfaces due to slippage or vibration, and require frequent calibration because of mechanical wear and tear. A contact encoder with inaccuracies as much as two per cent can cost a manufacturer a significant amount of money due to product give-away, waste, maintenance, and system downtime. To solve this problem, manufacturers

• Electrolytic plating • Candojet hot water cleaning • Electrolytic & Ultrasonic degreasing • Welding wire cleaning and copper coating • Pickling & phosphating www.candorsweden.com

Copperjet - High speed copper coating on welding wire

2004/22/EG requirements. NDC Technologies – USA Website : www.ndc.com

CANDOR Sweden AB Tel: +46 11 21 75 00 Fax: +46 11 12 63 12 Email: info@candorsweden.com

33

www.read-wca.com

Wire & Cable ASIA – July/August 2015