TPi May 2016

products & developments Bending production with BendingStudio 3.0

In thenewsoftware, it ispossible to repeat analyses of a measurement afterwards, making multiple measurements easier. The user can either deletemeasurements or change the parameters of the analysis. This is especially useful in partial measurements, ie if the part cannot be measured in a single step. Larger components are measured by overlapping repositioning section by section, and the partial measurements are then combined. If the overall measurement is not successful, new single measurements are added, defective measurements deleted or single measurements re-evaluated with changed parameters. This allows for a more effective workflow, as the part does not have to be completely re-measured in case of errors. The first version of BendingStudio had its world premiere at Tube 2012 in Düsseldorf, Germany. Since then, it has been continuously optimised. BendingStudio connects all data and processes around production of bent parts, from production and process planning to manufacturing and quality control. Holders of appropriate licences and a valid software maintenance contract will receive the new BendingStudio version 3.0 with the next software update.

arrangement optimises the process of measurement and analysis. The menu structure of the different applications has also been regrouped, so the user will find all relevant process steps neatly arranged. BendingStudio 3.0 also offers extended measurement options. Any connected measuring device, such as AICON’s TubeInspect or MoveInspect, only provides the measured centre line. A special wizard guides the user through the steps of the bending point model, and the user can intervene when needed. The analysis is usually automated, but manual interference is now more transparent and graphically supported. In Reverse Engineering, different bending radii can easily be taken account of.

AICON 3D Systems has launched a new version of the software platform BendingStudio, offering new features to facilitate daily work in bending production, and with a new control concept. In BendingStudio 3.0, user-friendliness has been totally revised, with the aim of a clearer structure and easier handling. The set-up of inspection plans is now separate from the measurements, so the user sees only the information that is relevant, and comparative measurements become easier. The set-up of new parts (eg creating bending elements from CAD files) is completely integrated into the application ‘part editor’. This new

The new BendingStudio 3.0 helps the user make fast fault detections

AICON 3D Systems GmbH – Germany info@aicon.de www.aicon3d.de IIL launches large diameter steel pipe mill

The large diameter steel pipe manufacturing facility will not only allow IIL to produce hollow structural steel sections for the construction and engineering industry, but will also allow it to cater to the increasing demand for API line pipes in the region. International Industries Ltd – Pakistan inquiries@iil.com.pk www.iil.com.pk

International Industries Limited (IIL) inaugurated its large diameter steel pipe mill in January. The expansion helps IIL to double its production capacity to 500,000 tons per year. Following the expansion, IIL is now able to offer MS pipes ranging from 0.5" to 12", API line pipe up to 12¾" and square and rectangular structural hollow sections. The company also manufactures cold rolled precision steel tubes, galvanised iron pipe, stainless steel tubes, and polyethylene and PPRC pipes.

22

Tube Products International May 2016

www.read-tpi.com