

May 2015 Tube Products International
19
business & market news
WWW.
TAG-PIPE
.COM
T A G
PIPE EQUIPMENT SPECIALISTS LTD
THE
TAG E-Z FAB
PIPE CUTTING & BEVELLING MACHINE
P
ipe cutting has changed...
J
oin the revolution!
A New, Unique, Self-centering, Heavy Duty dedicated Pipe Cutting & Bevelling machine.
Operated via a Touch-Screen Delta Control, a Heavy Duty 1.75 kW Servo Motor, gives the
E-Z Fab unrivalled power & torque, for accurate repeatable process cuts & bevels on
almost any material and wall thickness application.
0044 (0)1869 324144
sales@TAG-PIPE.com6” Carbon Steel
22mm Wall Thic
k
ness
Setup, Cut, AND Bevelled...
6 mins 34 seconds!!!
INTRODUCING...
7 Models covering 0.5” to 30”
Unrivalled wall thickness capabilities
Capable of cutting all materials.
Rapid Self Centering Jaw System
Touch screen control with preset cutting speeds
Unrivalled cutting speeds and times.
Buhlmann focuses on North America
business
The internationally operating Buhlmann
Group recently established Buhlmann
North America LP, an independent
subsidiary in Houston, Texas, USA.
The business is already present in
more than 27 locations in 19 countries
worldwide.
With stand-alone subsidiaries in
many parts of Europe and Asia, the
distributor of steel pipes, fittings and
flanges is always close to the customer.
By expanding to North America the
objective is to strengthen the position in
the US market and to explore new sales
potentials.
“The new location in Houston enables us
to not only be close to our customers,
but to react fast and more specific to the
requirements of the market,” said Robert
Bresser, managing director of Buhlmann
North America LP. The office of the new
subsidiary is located in The Woodlands
business location, close to Houston.
Many oil ventures, research institutes
and other globally engaged companies
are also located in this area.
Buhlmann North America LP
– USA
unitedstates@buhlmann-group.com www.buhlmann-group.comOptimised steel making
Kanto Steel Ltd has signed off on
performance savings for the supply
and purchase of an EFSOP
®
Holistic
Optimization System that was
commissioned in the spring 2014. The
EFSOP system was installed at the
EAF#1 ‘top charged’ 90t furnace at the
Kanto steel plant in Tsuchiura, Ibaraki,
Japan.
Consumption savings attained during
the project lifecycle were electrical 0.5
per cent, oxygen 8 per cent, kerosene
20 per cent, and an increase in yield
of 0.5 per cent. Overall consumption
savings reached were slightly more
than 190JPY/t.
Tenova Goodfellow Inc
– Canada
goodfellow@ca.tenovagroup.com www.tenova.com