TPi July 2015

products & developments

Flight and nuclear safety boosted by sound research

Katherine Tant, a research associate with Strathclyde’s Department of Mathematics and Statistics who led the study, said, “Welds are vitally important in ‘safety critical’ structures, like nuclear power plants, aeroplane engines and pipelines, where flaws can put lives at risk. However, as with any type of bond, they constitute the weak part of the structure. “One particular type of weld, made of austenitic steel, is notoriously difficult to inspect. We were able to devise solutions involving the use of ‘chirps’ – coded signals with multiple frequencies which vary in time. The type of flaw identified depends on the method used. An analogy would be the type of echoes produced by clapping loudly in a cave – a single clap may allow you to judge the depth of the cave while a round of applause will give rise to a range of

A system for using sound waves to spot potentially dangerous cracks in pipes, aircraft engines and nuclear power plants has been developed by an academic at University of Strathclyde, UK. A study found that transmitting different types of sound waves can help to detect structural defects more easily. This is achieved by varying the duration and frequency of the waves and using the results to recreate an image of the component’s interior. The system is a model for a form of non-destructive testing that uses high- frequency mechanical waves to inspect structure parts and ensure they operate reliably, without compromising their integrity. It will be developed further and could potentially also have applications in medical imaging and seismology.

The study was led by Katherine Tant, a research associate at Strathclyde

echoes, perhaps allowing you to locate boulders.”

The study has been published in the journal Proceedings of the Royal Society A . It was funded through the UK Research Centre in NDE Targeted Programme by the Engineering and Physical Sciences Research Council, AMEC, the National Nuclear Laboratory, Rolls-Royce, Shell and Weidlinger.

University of Strathclyde – UK www.strath.ac.uk

www.thinwalltubing.com

MADE IN CHINA

Tubing Solutions LLC offers solutions for your tubing needs. Thin wall tubing is available in a variety of alloys to meet your specific applications. Stainless steel alloy, nickel alloys, copper alloys and other alloys. We can achieve tube walls thickness 0.0025” with as tight tolerance as ±.0003”. We also can do telescope tubes as many layers as you like. That is Tubing Solutions’ dedication to PRECISION.

0.004 " wall thickness telescope tubes

One end blind thin wall tubes

One end blind bellows

Bellows

881 Dunbar Ave, Oldsmar, Florida 34677, USA Jerry Wang - Cell: +1 813-298-6667 Email: tubingsolutions@outlook.com

38

Tube Products International July 2015

www.read-tpi.com