TPT May 2021
T E CHNOLOG Y
Eliminate porosity during welding with a dew point sensor from Huntingdon Fusion
THE presence of moisture on the joint surface can create porosity in the weld metal. It is therefore important that the dew point is monitored so that welders are made aware when moisture is likely to be present. Innovators in weld purging, Huntingdon Fusion Techniques, have
recently developed a Dew Point Sensor, an important predication instrument for when water will form on metal surfaces in the welding environment. Ron Sewell, chairman for HFT, said: “Under arc conditions, water is broken down into hydrogen and oxygen in atomic form which, when present in weld metal, causes porosity and are known to create cracking in the weld joint. Water can form as moisture on metal surfaces while welding, so it is crucial to be able to measure “dew point” while welding
lengthy critical joints as conditions can change during the welding process.” “The PurgEye ® Dew Point Sensor accessory has been designed to integrate with most of the Argweld ® Weld Purge Monitors ® via the PurgeNet™ lead that is supplied with them, thereby giving values and water present on the same screen. In this way, the user is not forced into the purchase of an expensive, separate Dew Point Monitor that will give its reading elsewhere.” The Dew Point Sensor is designed to fit any of the Argweld Weld Purge Monitors ® that read down to 1ppm, which includes the PurgEye 200, PurgEye Desk, PurgEye 600, PurgEye 1000 and the PurgEye Site. Data is displayed on the OLED screen of the Weld Purge Monitor in split format. Huntingdon Fusion Techniques HFT www.huntingdonfusion.com
The Dew Point Sensor predicts when water will form on metal surfaces
36
www.read-tpt.com
MAY 2021
Made with FlippingBook - Online catalogs