TPT May 2017

T E CHNOLOG Y

Perpetual motion and innovation THE process of tube bending consists of a series of independent steps, according to Omni-x, which is based in the Czech Republic. all the above benefits and provide non- hazardous products that can be further modified.

strong background when building up synthetic coolants. Complete customer care with all in-house knowledge will help customers to switch from mineral oil, to protect workers and extend tool life.

Drawinglube,whichOmni-xspecialises in, is extended by the production of coolants. The company shares some principles and widens the range to high- speed operations. Years of experience from bending gives the company a

The steps rely upon one another and each can cause a range of problems. As technology progresses customers are increasingly looking to achieve more for less. The best results are achieved by first using the correct set-up of tooling and using the correct lubrication. Lubes are chemical reactants for surface use and thus very sensitive for correct selection and application. The most important qualification of tube fabricating lubricant is its ‘compatibility’. The lubricant’s properties must be compatible with the tooling, material, environment of components, cleaning process and any other secondary operations that may have to be performed. Fabricating without using petroleum oil is becoming an everyday reality. Old- fashioned mineral oil-based lubricants are not only less popular, but operators are aware of alternative methods. The market is being driven by ecological concerns and political mandates. Mineral oil products are no longer the future and the use of clean alternative products is encouraged. Industries that were dominated by mineral oil are becoming environmentally aware and also desire a healthy working environment for the operator. This matches the Omni-x company philosophy, which is to keep things simple and offer an affordable price. It has recently introduced the latest tube bending lube that covers all the concerns listed and extends superb results on ferrous and non-ferrous materials. Cleaning is no longer a problem because every product washes off easily with water. There is no need to clean before welding. Another benefit from moving away from mineral oil products is the easy modification of the product bases on the customer’s specific requests. Omni-x gives its clients a full range of modification lube at its plants and helps to find the best and most cost- effective solution. Omni-x has also extended its product range and introduced ALC series products. Formulating without typical EP additives such as chlorine and sulphur is essential. New improved products merge

Omni-x – Czech Republic Email: info@omni-x.cz Website: www.omni-x.cz

35

www.read-tpt.com

MAY 2017