TPT March 2020
30 March – 3 April 2020
Online measuring, control and inspection from Sikora AG
06 G04
control and information transparency in terms of Industry 4.0. With the Fiber Series 6000, Sikora will present a wide range of measuring systems for quality control of optical fibres at different positions in the drawing tower. The range consists of systems for the measurement of the diameter and the position of the naked and coated fibre, as well as for the determination of the tension and detection of airlines. Further gauge heads measure the fibre temperature at the hot position, to determine the fibre temperature for the control of the furnace, and at the cold end, to exactly dose the helium used for the cooling. In addition, a gauge head is available for the determination of the concentricity of the coating as well as for the detection of lumps on the surface of the coated fibre. Sikora will also exhibit systems for plastic material inspection. The Purity Scanner is an online inspection and sorting system based on X-ray and optical technologies. Contamination inside the pellets as well as on their surface is detected and automatically sorted out. The Purity Concept X is an offline in - spection and analysis system, based on X-ray technology. It detects and analy- ses contamination both on the surface and inside transparent, translucent and coloured plastic material.
SIKORA is a manufacturer and supplier of online measuring, control, inspection, analysis and sorting technologies for
the hose and tube, sheets, metals, wire and plastics industries. Its technology is used for increasing quality, pro- cess optimisation and
efficiency in manufacturing. At Tube 2020, Sikora will present laser and X-ray tech- nologies that precisely and reliably measure product pa- rameters such as diameter, ovality, wall thickness and concentricity. The company’s product portfolio includes spark testers for the detection of insulation faults, lump detectors for the detection of faults on the product surface, capacity measuring systems, and devices for conductor preheating and temperature measurement/control. Systems for online and offline inspection, sorting and
The measuring values of the X-Ray 8000 Advanced are visualised at the monitor of the included processor system
analysis of raw material, for example for the insulation of high voltage cables, round off the product range. With the X-ray based X-Ray 8000 Advanced, Sikora will showcase at Tube 2020 the High-Speed Technology (HST) that is tailored to the demands of MV, HV and EHV cable production. It represents an advanced alternative to the X-Ray 8000 NXT. The system is equipped with 16 measuring sensors and measures the diameter, wall thickness and eccentricity of cables in CV lines up to ten times faster than the X-Ray 8000 NXT, for more efficient
Sikora AG www.sikora.net
Tube cutting and bending machines
15 E18
such as automatic bending machines, shears and hoop spiral machines, to full industrial and automatic cut and bend plants with shear lines, robot benders, automatic cutting and shaping centres.
Oscam, a manufacturer of cutting and bending machines for reinforced steel processes, will introduce new stirrup bending machines and mesh bending machines at Tube 2020. The company will also provide an introduction its whole production range, from small machines for building sites,
Oscam Srl www.oscam.com
142
www.read-tpt.com
MARCH 2020
Made with FlippingBook - professional solution for displaying marketing and sales documents online