TPT January 2017

T E CHNOLOG Y

New innovations in TracStar range MCELROY has launched a new series in its TracStar line. The TracStar Series 2 for medium-diameter pipe now shares a common vehicle that is interchangeable with the 28, 250, 412 and 618 fusion machines for 2" IPS to 18" OD thermoplastic pipe. An updated electrical system increases the circuit protection, and a standard battery dis- connect is now incorporated for easy lockout.

“TheTracStar hasbeendepended on for years because it manoeu- vres so easily on any job site with its self-contained, self-propelled and rugged all-terrain system,” said McElroy director of product development Jason Lawrence.

The cowlingwas redesigned to provide better airflow and heat dissipation, and there is also easier access to the engine when maintenance is required.

TracStar 618

McElroy TracStar 28 Series 2

The carriage can be converted from four to three jaws for a more compact unit and is easily removable for in-ditch fusion. An on-board generator powers the hydraulics and heater, and dual hydraulic pipe lifts aid in transferring pipe.

“Part of its success is the fact that we continue to listen to our custom- ers and incorporate many machine advances based on their experi- ences.” TheTracStars are pow- ered by a diesel engine and feature a patented centreline guidance sys- tem for equal distribution of force around the joint.

McElroy – USA Fax: +1 918 831 9285

Email: fusion@mcelroy.com Website: www.mcelroy.com

TUBE END FORMING AV65 Hydraulic OD

weld-seam chopper for increased operator protection OD bead scarfing is essential in welded steel tube production for meeting high standard norms, according to Alpha Metall, Germany. The well-known winding technology for scarfed OD bead does not comply with most factories’ safety rules, because there has not been an adequate solution for this issue. An easier solution, provided by Alpha Metall, is a compact combination of proper OD bead scarfing and immediately making small chips of the OD bead. The hydraulic-driven OD chopper is available for tube OD up to 24".

SIDE LOADING FOR FAST TOOL CHANGE AND NO LIFTING REQUIRED • Infinitely adjustable expansion & reduction • High production capability

• Up to Ø 152mm • No tube clamping required • End form on or near bends • High quality build with practical platforms • Full 12 month warranty. • Twin Head Machines also available

Unit 24, Padgets Lane, South Moons Moat, Redditch, Worcestershire B98 0RB, England. T: +44 (0)1527 518520 E: info@avamatic.co.uk W: www.avamatic.co.uk Germany: Tel: 02150 2500 Netherlands/Belgium: Tel: (04756) 6888 USA: Tel: 708 272 7880

Alpha Metall GmbH & Co KG – Germany Fax: +49 6831 506958

Email: info@alpha-metall.de Website: www.alpha-metall.de

38

www.read-tpt.com

J ANUARY 2017