TPT September 2022

“Our connectors can accept steam or chemicals passing through at high pressure and temperatures. If it were to burst, severe injury or flooding can result. From damage to equipment, to whole buildings being written off – the repercussions would be huge. Our Safeflex flexible pipe connectors are such a reliable design that we’ve never had a failure.” While this project was clearly a massive engineering exercise, the quality and reliability of Mason UK’s products, coupled with the company’s unrivalled design expertise, proved invaluable to ensure the upgrade will be a success. Mason UK is a specialist in vibration isolation products for architectural noise control, mechanical and electrical (M&E) systems and HVAC isolation. The Surrey-based engineering firm also offers design, supply and installation of floating floor systems.

mounts with different housing to meet the needs of this project. This allowed for clearance on vertical ducts when they grow and shrink thermally. As with any project of this magnitude, smooth installation is key. The physical size of the products, some of which were half a metre in height and a vast range of sizes, could have proved tricky. Mason UK went above and beyond to help simplify the process. The company anticipated that it would be difficult to detail all duct supports and created bespoke spring mounts, with consistent dimensions and attachments. This ultimately made the installation cheaper and easier. Quality of product Mason UK also supplied flexible connectors for the project to isolate the pumps from the ground. The flexible pipe connectors selected were the Safeflex variety, using a uniquely robust flange design and reinforced with Kevlar, which has immense strength and fantastic resistance to becoming brittle over time. Cheaper variations use nylon and can become brittle if heated water passes through it. This can lead to failure, which is absolutely unacceptable for a continually running fabrication process. “No one else builds connectors in this way,” continued Mr Fox. “With the vast majority of connectors, you snap them on to their flange – but if you can snap them on, you can also snap them off. We use a solid steel ring which is bolted in place so that there’s no way it can snap out and fail.

Mason UK www.mason-uk.co.uk

80

TUBE PRODUCTS INTERNATIONAL September 2022

www.read-tpi.com