TPT September 2014

Technology News

Reshaping stainless steel tubing for fluid applications

stands, while reducing the effects of rotational speed differences, due to changes in tool-to-section radii. Orientating a section like this would normally cause headaches for cut-off manufacturers because the system requires a horizontal flow to shear the ellipse to length. Yoder and the inter-company expertise of Hill Engineering were able to determine that designing a cut- off with a complete horizontal cutting motion yielded more advantage to the reshaping process. In summary, reshaping of austenitic tubing is possible but you should consider the overall manufacturing solution with the forming, tooling and cut-off as an integrated system. Allowing ample amount of stands to perform the reshaping, and orientating the product so that it is aligned to the strengths of the mill system, is crucial in producing a complex shape successfully. Information supplied by Brian Kopack, senior sales engineer, Formtek, Inc

cations, the manufacture of complex stainless steel tubing requires an integrated tooling and mill design to optimise the forming process. Many tube mill system producers do not have this expertise in house and must work with their tooling suppliers externally to determine the correct material flow patterns that yield satisfactory results. As part of the Formtek Group, Yoder Manufacturing is able to supply tube mills, roll tooling and cut-off equipment, in conjunction with Hill Engineering, another Formtek company. As a whole, they are able to look at the complete manufacturing system and apply appropriate disciplines to yield a system that reshapes round, fusion welded tubing into an ellipse. Based on recent installations, Yoder installed an elliptical tube system that produces a finished product that is 73 per cent thinner than the incoming round tube diameter. Due to the reshaping tooling designs, the final product had minimal surface marking, typically caused by speed mismatch, which was accomplished by considering the profile orientation through the mill: the tall axis of the ellipse is horizontal, taking advantage of the natural forming state of the driven

MANY producers of round austenitic stainless steel tubing often wonder how much reshaping can be performed while not harming the material integrity due to cold working and how they orientate that section for their mill system. Taking round product and reshaping, or reforming, into complex shapes is common among carbon steel tube producers but not common to austenitic stainless steel producers. The term ‘complex shape’ does not necessarily require various sharp angles, which have no purpose in fluid or heat transfer applications. Instead, complexity can encompass very thin, tall elliptical shapes that are not easily produced on standard reshaping- capable tube mills. Depending on the application, five, six, seven or more stands are required to reshape the round product into elliptical shapes. It essentially depends on how much material must be physically moved. A well-engineered tooling arrange- ment will design around a specific amount of material movement that can be accomplished per pass, per horiz- ontal centre (centre between driven stands), etc. Unlike more common tubing appli-

Formtek, Inc – USA Fax: +1 216 292 2898

Email: yoder@formtekgroup.com Website: www.formtekgroup.com

The next Generation of Carbide Tipped Tube Mill Saws have arrived.

Special engineered carbide tipped saw blades for orbital cutting of API casing and Line pipe on ERW mills. • GPX300 is the right choice for sawing API 5CT J55 to P110. • GPX400 is the right choice for sawing API 5L tubes X42 to X100. • GPX100 is the right choice for sawing Structural ASTM tubes. Blades in stock for OTO MILLS, MTM, KUSAKABE, NAKATA, LINSINGER, THERMATOOL. Worldwide Sales • Worldwide Service. Tru-Cut Saw A Leading Manufacturer In Sawing Technology www.trucutsaw.com

Phone: 330.225.4090 • Toll Free: 800.878.8761 • Fax: 330.225.4741 • E-mail: trucutsaw@trucutsaw.com

TCSW-058_HighPerformAdTPT.indd 1

6/18/13 2:06 PM

49

www.read-tpt.com

S eptember 2014