TPT November 2015

Scanning laser micrometers for diameter and ovality measurement

thickness and concentricity on products with as many as four different layers. UltraGauge+ systems have been used to measure very thin wall, as small as 25μm (0.001") and requires no special options or settings to do so. Gauge interface products, laser micrometers and ultrasonic-based devices, with the exception of transducers, are covered by a four-year warranty. Ultrasonic transducers have a one-year warranty. Technical support via phone, email and interactive Internet-based support is free for as long as the customer owns the product. LaserLinc products are designed by LaserLinc employees and made in the USA. They are tested and certified to meet safety standards such as CE, UL and CSA.

an accurate ovality measurement, regardless of product orientation. LaserLinc’s models also offer a fast measurement rate of 4,000Hz per axis (12 KHz aggregate for some in the three-axis Triton series). High- speed models allow simultaneous diameter measurement and detection of lumps and neckdowns. Using one device for both saves money, simplifies installation and reduces maintenance. LaserLinc’s UltraGauge+ product line measures wall thickness and eccentricity/concentricity using ultra- sound. It accommodates a wide range of product diameters and material thicknesses. Many different styles and options are available encompassing fixed and adjustable transducer positioning, installation in vacuum or open tanks, product guiding and up to eight transducers. An UltraGauge+ system can measure

LASERLINC specialises in laser and ultrasonic technology for precision measurement of diameter, ovality, material thickness or wall thickness, concentricity and inside diameter. LaserLinc’s measurement equipment and interface products reduce material usage, increase production efficiency, reduce scrap, facilitate process improvement and improve and document product quality. LaserLinc’s scanning laser micrometers for diameter and ovality measurement measure diameters for the smallest tube up to as large as 228mm. With 16 models to choose from, solutions are available for virtually any requirement. For the best average diameter and ovality measurement, select a Triton three-axis micrometer. LaserLinc’s technology utilises all of the information available from its three- axis Triton micrometers to produce

LaserLinc – USA Website: www.laserlinc.com

47

www.read-tpt.com

N ovember 2015