TPT November 2014

Technology News

New ODAC ® 230 laser measuring head

measuring axes or more and built into protective housings for applications in hot rolling mills or other hot and cold processes. Such systems can be used for static, oscillating or rotating designed systems. TheODAC ® systemguarantees awide variety of measurements and quality checks: diameter measurements; gap width measurements; penetration depth measurements; height measurements; multi-measurements; dual scanning – large measuring field (synchronised); and dual scanning XY (synchronised). Further advantages are: “single scan” calibration CSS; “single scan” monitoring; data rate up to 333/s (dependent on measuring head version, number of transferred measuring values as well as the baud rate of the interface); flexible installation; and it is compact and robust. The ODAC ® 230 is available with an integrated processor (DP, EN, RS) as with the majority of the ODAC range measuring heads. Zumbach Electronic AG – Switzerland Email: sales@zumbach.ch Website: www.zumbach.com

THE ODAC ® laser measuring system has been proven in various markets over the last 40 years to measure diameters, widths and heights. The recently launched model 230 from the ODAC ® range has been specially developed to measure large dimensions in confined spaces. The flexible modular single axis ODAC ® 230 can be integrated,

customer specific, into the production line on a rail or only as a sender and receiver. The scanner with a measuring field of 230mm is dominant in the measurement of cables, hoses and profiles during extrusion or when drawing and grinding rods and pipes. Thanks to the modular design the measuring head is also suitable for combined systems of up to three

ODAC ® 230 laser measuring head with connecting rail

Sawing Technology One step ahead since 70 years

Tube cut-off machine RTM 420 for seamless tube mills

Advantages: – Accurate cutting angle – Smooth cutting surface – Burr-free cuts

– No chips in the tube – Narrow cutting width – Carbidge inserts for quick and easy tool change

The eccentric movement is generated by the combination of the x and y axis movements

Tooling costs 55% lower than saw blades

Dr. Linsinger-Str. 24, A-4662 Steyrermuehl, Tel. +43 7613 88 40 Fax +43 7613 88 40-951, E-Mail: maschinenbau@linsinger.com

w w w . l i n s i n g e r . c o m

Tube_and_Pipe_180x125_11.2014_rtm OK!.indd 1

18.09.2014 15:24:52

54

www.read-tpt.com

N ovember 2014