TPT November 2011

I ndustry N ews API certification for Horn

milling tools to achieve this distinction. As well as certification according to ISO 9001:2008, Paul Horn GmbH can now refer to an industry specific, internationally recognised standard. It may also mark its products with the API monogram. Horn tool systems for machining of oil field pipes and sleeves – such as System 117 – are designed for the end machining of rotating or stationary oil field pipes up to 25" diameter. The product range currently includes tools for external and internal turning of API and special threads, internal and external chamfering, machining sealing seats, grooving, parting off and peeling.

IN spring 2011 Paul Horn GmbH was assessed as meeting requirements for certification to API Q1 by the American Petroleum Institute (API). API is the leading trade association for the oil and gas industry whose specifications are recognised internationally. By meeting the quality system requirements of API Spec Q1, companies demonstrate that they are capable of meeting the industry’s exacting demands. Hartmetall-Werkzeugfabrik Paul Horn GmbH is now listed on the APIQR’s Composite List. It is thus far the first manufacturer worldwide of turning and

Paul Horn GmbH – Germany Email: christian.thiele@phorn.de Website: www.phorn.de

Paul Horn has received its API Q1 certificate Modernised strip galvanising line boosts productivity

WUPPERMANN Staal Nederland BV has placed an order with SMS Elotherm for the modernisation of a strip galvanising line delivered in 2000. With an inductive booster heating system from SMS Elotherm, it is claimed that Wuppermann will be able to increase its productivity by 30 per cent. SMS Elotherm is to supply a complete 3,600kW induction plant with two strip coils. In addition there will be new components for the existing plant and the line controller will be integrated into the overall process.

Erection and commissioning as well as training of the customer’s personnel also form part of the order. With the inductive booster heating at the tower entry, the ingoing temperature from the pickling line is raised by approximately 150°C. The existing plant power is then used to increase the temperature to process temperature. The efficiency of the booster heating system will in future be higher than the values at present. The inductive booster heating plant for strip galvanising

is designed for strip thicknesses from 0.8 to 4mm and a strip width of up to 1,660mm. Wuppermann has planned a 15-day standstill for installation and commissioning. The start of production after the installation of the booster heating plant is scheduled for the beginning of 2012. SMS Elotherm GmbH – Germany Fax: +49 2191 891 229 Email: info@sms-elotherm.de Website: www.sms-elotherm.com

22

N ovember 2011

www.read-tpt.com

›