TPT May 2013

Technology News

Non-contact thermometer ELECTRONIC Temperature Instruments Ltd (ETI) has launched theMini RayTemp non-contact infrared thermometer.

to assist in pinpointing the area of measurement. The unit incorporates a 12:1 optic ratio (target distance/ diameter ratio) and a fixed emissivity of 0.95, making it suitable for a wide range of applications. Electronic Temperature Instruments Ltd – UK

The Mini RayTemp has a clear, easy- to-read LCD display with low battery, backlight indication and an auto-power off facility that turns the instrument off after ten seconds, to maximise battery life. The thermometer is suitable for temperature measurement applications where contact with the item to be measured is an issue. The thermometer also incorporates laser dot alignment as standard,

The compact and lightweight thermometer, which is operated simply by aiming and pulling the trigger, measures temperatures in the range -50° to +330°C, with an assured accuracy of ±2°C over the range of 0 to 330°C. Outside this range (ie -50° to 0°C) accuracy is ±4°C.

Email: sales@etiltd.co.uk Website: www.etiltd.co.uk

Davi sells its eleventh angle roll in past two years

appreciate the sturdy construction and oversized shaft, showing that the machine can hold up to any load within its capacity without caving in.

(W 12") hard way, not an easy task but not a problem for Davi angle rolls. The Davi machines are installed over the five continents, to be used for steel building construction, bridges and sport domes, where the performance of the machines are carried over the limit. Customers

WORLDWIDE preference for Davi heavy-duty angle roll is the result of the efforts to build machines that fully satisfy customers’ expectations. This is possible only if the machines comply with the requested performances to bend large size beams, from HEA 300

Davi – Italy Website: www.davi.com

WITH KINKELDER YOU ARE SURE OF: • High level sawing process • Better cutting quality

• Better blade life • Higher efficiency • Lower cutting costs

• Choice of blades from steam treated quality to superior coatings in HSS and TCT blades

Made in The Netherlands

Meet us at theTube Russia

LSAB Russia: www.lsab.se/ru

www.kinkelder.com