TPT March 2013

Technology News

Angle and detail machine PEDDINGHAUS Corporation, a supplier of CNC technology for the structural steel industry, has added a new model to its Anglemaster range. The Anglemaster- HD utilises Smart Cylinder technology that optimises hydraulic fluid levels for accelerated production. Equipped with two 3-speed (8" x 8" x 1"), and flat bar up to 300 x 25mm (12" x 1"). Equipped with Peddinghaus’s

the length of punch or shear stroke required for maximum productivity. Using this system, the Anglemaster-HD is also capable of verifying section sizes before initialising a program, resulting in a reduction in operator error. The system can be optionally equipped with part stamping or carbide scribing units.

Roller Measurement technology, the Anglemaster-HD allows material to be stored outside until production takes place. This method of measurement provides benefits such as streamlined handling and reduced overhead costs. The Anglemaster-HD also comes standard with an automated material dimensioning system. This allows it to identify the size of a profile and determine

153-metric ton punch cylinders with triple tool punches, and one 467-metric ton 3-speed shear cylinder with single cut tooling, the Anglemaster-HD can process angles up to 200 x 200 x 25mm

Peddinghaus Corp – USA Email: info@peddinghaus.com Website: www.peddinghaus.com

Rollers for 12" to 54" pipes MCELROY has introduced MegaMc ® Rollers pipe rollers for 12" IPS to 54" OD (340 to 1,400mm) polyethylene pipe sizes. of 9,000lb per unit. The fused joint and pipe roll through the device easily. By keeping the pipe off the ground, the pipe is protected from the damage of being pulled along the ground, as well as excessive pulling forces.

The new MegaMc Rollers offer many of the same benefits as the preceding rollers, but on a larger scale. McElroy Manufacturing Inc – USA Fax: +1 918 831 9256

The rollers keep pipe off the ground and aid in the pulling of fused pipe along the right of way. The MegaMc Rollers are tip-resistant with a capacity

Email: fusion@mcelroy.com Website: www.mcelroy.com

Four years ago, McElroy released Low Profile Rollers for 4" to 20" piping.

SMART PIPING SOLUTIONS

TRACTO-TECHNIK

Machines Innovative machine technology for bending and processing pipes and profiles

Measuring technology Highly precise measuring systems and methods for quality assurance and reverse engineering

Software Pipe shop automation, work- flow optimization and lifecycle management for piping

TRACTO-TECHNIK GmbH & Co. KG TUBE TECHNOLOGY · D-57368 Lennestadt Tel.: +49 (0)2725 9540-0 · Fax: 954033 Email: tubomat@tracto-technik.de http://pipebending.tracto-technik.com

08. -12.04.2013 Hannover (DE) Hall 20, Booth A09

57

www.read-tpt.com

M arch 2013