TPT March 2012

26-30 March 2012

Roll tooling from Eurolls

Eurolls has beenmanufacturing roll tooling for markets worldwide for over 20 years. A few years ago, the company established branches in Brazil and Mexico, specifically tailored for the local markets. Although Eurolls Do Mexico and Eurolls Do Brazil specialise in the sales, manufacturing and regrinding services for rolls and cassettes for the wire sector, both companies have noticed a significant increase in volume for tooling for the tube/pipe sector over the last two years. The company has integrated, within its own facility, the latest generation of furnaces for heat treatment. This considerable investment gives Eurolls an advantage when it comes to quality control. It is extremely careful when calculating every step of the manufacturing process, which starts with selecting the best raw materials, developing the design and manufacturing techniques, and concludes on the production floor, where strict quality controls and certifications are instituted in each phase of the roll manufacturing process.

able to combine high accuracy and speed of execution – even with complex shapes. The performances guaranteed by the manufacturer are obtainable for several technical reasons. Rectilinear guides: the frame is designed in order to have strong guides where the rolls supports slide during movements. It is high technology and the results produce a high quality of pre-bending operations. MCS system: the multi-bearing system is a guarantee of reliability and precision of the bending roll. Each roll is supported by four independent bearings, which allow the distribution of loads and the alignment of bending axis. EPS System: the introduction of electronics into the rolls parallelism is the confirmation of the continuous research towards accuracy and repeatability of performances. The rolls movement is controlled by an electronic unit to assure the perfect synchronism of the extremities and the absolute precision of positioning of the roll. High accuracy and high speed four roll plate bending › › ›

Fax: +39 0432 796501 Email: info@eurolls.com Website: www.eurolls.com

Faccin Italy

5I13 FACCIN’s four rolls plate bending machine 4HEL series with computerised numerical control model PGS-ULTRA are provided with all the accessories to make the machine

161

www.read-tpt.com

M ARCH 2012