TPT July 2021

T E CHNOLOG Y

Complete anti-rust solutions from DieTronic FOR more than 15 years DieTronic Srl has been working in the tube and pipe industry as a manufacturer of automatic anti-rust systems for the spray application of rust preventive oil (RPO) on the surface of tubes, pipes and profiles. and dimensions. A tray is provided with molds of different sizes, that have a central hole, through which the pipe can run and on which four canalisations dispense the cleaning oil. This allows the user to easily replace the molds according to the tubes that need to be cleaned.

DieTronic technology is respected world-wide by those working in the field, as it grants protection for the finished product against oxidation, especially during the delicate phases of transport and outdoor storage when there are significant changes in temperature. In order to ensure a complete protection treatment against tube rusting, DieTronic has designed two special additional accessories to be located before the well-known anti-rust spraying system. These two devices aims to enhance the spray quality of the protective fluids and to reduce waste: the tube cleaning system was developed to cleaning the tubes more deeply, while the use of pneumatic air knifes, placed at the entrance of the anti-rust machine, was

Furthermore, two other holes, one for cleaning and maintenance and another for the automatic drainage, allow the user to recover the dispensed product and the dirt coming from the tube. In case of bigger profiles sizes being required, DieTronic provides an air blower generator system that blows the air through a motorised turbine, reducing air consumption. These two accessories, with the anti- rust spray system, and the minimum quantity lubrication (MQL), technique for saw blades, comprise DieTronic's complete solution for corrosion.

designed to prepare a perfectly dry tube/ profile surface before the spraying of RPO. The tube cleaning system was conceived after the request of three Italian pipeline manufacturers. It is particularly useful for the cleaning of very dirty tubes, for example in the automotive field, by using solvents or water-based products. The system can be adapted to tubes of different shapes

DieTronic Srl www.dietronic.eu

Tube and Pipe Endforming Systems

Model 400 HPU

This precision built, high pressure unit, and tooling, enables you to form a tube end, with minimal marring in 2-5 seconds.

“ U NPARALLELED P ERFORMANCE AND S AFETY U NDER P RESSURE!” ®

airmo.com

1-800-394-0016

© 2021 Airmo Inc.

29

www.read-tpt.com

JULY 2021