TPT January 2014

Technology News

Eddy current and ultrasonic rotating heads for flaws detection CONTROLE Mesure Systèmes,

for quality services and customers. Data stored can be recalled and helps to analyse and recommend treatment. All the systems meet quality standards such as API, ASTM and DIN and could be used online and offline. Through its products and its remote assistance, Contrôle Mesure Systèmes provides quality and productivity solutions for industrial applications internationally. Contact the company at Tube Düsseldorf stand number 6H39, Hall 06. Contrôle Mesure Systèmes – France Email: contactcms@cmseddyscan.com Website: www.cmseddyscan.com

It is also available in carbon steel (diameter range 6 to 250mm) for longitudinal and transversal defect detection, thickness measurement and ovalisation. Ultrasonic and eddy current rotating heads (RotoUTscan and RotoETscan) can be combined with other CMS equipment (magnetising units, rotating systems and support coils). They can be installed together in a strong control bench including centring devices. Supervision software called Probus (which collects information provided by NDT equipment) allows customers to display combined signals (UT/ ET) and create inspection reports that can be used as control evidence

which has now operated for more than 25 years, designs, develops and manufactures a complete NDT range of products in eddy current and ultrasonic testing methods, which comprise high performance instruments and systems, probes and transducers, accessories, and complete turnkey machines with associated mechanics. The main equipment manufactured by CMS is: eddy current rotating heads RotoETscan for tubes and bars diameter range 1 to 220mm for surface, subsurface and punctual flaws detection; and ultrasonic rotating head RotoUTscan for tube inspection, either welded or not, in stainless steel, titanium or zirconium.

VISIT US AT TUBE DÜSSELDORF

MFL Meeting Point 07 - 11 April 2014 Hall 6, Stand E41

PERFECTION IN ALL AREAS

SEAMLESS PIPE PRODUCTION EQUIPMENT FROM ONE SOURCE • Cutting of semi-finished material and single pipes up to 800 mm in diameter • Cutting of finished pipe length up to 508 mm in diameter and a maximum layer width of 1.5 m • Chamfering of pipe ends from 200 mm up to 3000 mm in diameter

Maschinenfabrik Liezen und Gießerei Ges.m.b.H. Technical Office Sawing and Milling Technology

Oberweis 401 4664 Oberweis, Austria P: +43 3612/270-1800 sawing.milling@mfl.at

32

www.read-tpt.com

J anuary 2014