

January
2013
103
Article
subject”, persisting in taking the researching principle of “never
copy, attaching great importance to innovate and stride”,
adopting the researching method of “researching production
process must be combined with researching equipment”,
persisting in taking the aim of “international advanced
level and innovating China’s national brand” are our some
realisation for successfully researching and developing new
roll replaced forging by casting under the pressure of heated
market competition day by day of late twenty years.
References
[1]
Huang Qingxue, Shen Guangbin, Liang Aisheng, Chen Zhanfu “Study
and application on mill bearing and roll life” Beijing: metallurgy industry
publishing house, 2003
[2]
Shao Shuncai, “Centrifugal casting roll technology, technical innovation
and development” 2008 international symposium on roll manufacturing
and application
[3]
SunZeji and so on “developing and application of casting roll for cold rolling
process” 2008, international symposium on manufacturing and application
of roll
[4]
Fu Hanguang and so on “manufacturing technology of high speed steel
roll” Beijing: metallurgy industry publishing house, 2006.1
Material of roll, shaped method
Straightening number after worn 1mm at radial of roll
X155CrVMo121 forging roll
10,000 ton
SDSF High chromium alloy roll
12,000 ton
Table 4
:
Comparison of wear resistance for heat straightening
Material of roll, shaped method
Straightening number after worn 1mm at radial of roll
X165CrMoV12KU forging roll
19,000 piece
9Cr2Mo forging roll
13,000 piece
SDSF High chromium alloy roll
38,200 piece
Table 5
:
Comparison of wear resistance for cold straightening
No.
A
B
C
D
E
Material
X155CrVMo121
D2
SKD11
SDSF
High chromium
alloy
SDSF
High chromium
alloy
State
Quenching, tempering Quenching, tempering Quenching, tempering
Tempering for
eliminating stress Quenching, tempering
Table 6
:
The material number of wear resistance testing in the laboratory
Material
Material
Abrasion volume (mm
3
)
Average abrasion volume (mm
3
)
Figure 4
:
Abrasion volume of material
Figure 5
:
Average abrasion volume of material
Testing result:
Shandong Province SiFang Technical
Development Co Ltd
– China
Email:
sdsf@vip.163.comWebsite: www. cnsdsf.com