

J
anuary
2011
43
›
T
echnology
U
pdate
combination with CSS, makes the gauge
an effective tool at three roll blocks or
when the bar has polygonal or asymmetric
shape deviations, eg asymmetric underfill
or overfills. It calculates the typical
values DT and GT for
the initial roll settings,
and can also calculate
and display ‘roundness’
RON according to the
official ISO definition for any
shape.
The mechanical system is
the same as the design of the
smaller gauges and requires
minimal maintenance and
only periodic cleaning.
Smaller gauge models for
wire rod and smaller sizes are
also available.
Zumbach Electronic AG
–
Switzerland
Fax: +41 32 356 04 30
Email:
sales@zumbach.chWebsite:
www.zumbach.comDr. Linsinger-Str. 24, A-4662 Steyrermuehl
Tel. +43 7613 88 40, Fax +43 7613 88 40-951
E-Mail:
maschinenbau@linsinger.comw w w . l i n s i n g e r . c o m
Cold Circular Sawing Machine
for tube layers
Cutting time:
10 sec. per tube
KSA 1600L, 5 pcs. Ø 210 x 8,9 mm St 52
•
Ready for market, burrless cut ends
•
Very short cutting times per tube
•
Huge savings in handling and space
requirement
•
Crack-free, stress-free surface
•
Lower tooling costs
•
Unique single source tooling service
Tube_and_Pipe_180x125_11-2010.indd 1
25.11.2010 23:34
ZUMBACH Electronic AG has extended its
range of Steelmaster rod and bar gauges
with a larger model.
The new gauge, SMO 160-S6, is
equipped with six high-speed ODAC
®
160
laser scanners and delivers up to 6,000
measurements/sec (ie 1,000 processed
profiles/sec).
It also features Zumbach’s
calibrated single scan system
(CSS) and the EPM method and
software.
The gauge is able to measure
rounds, hex, squares, flats and various
shapes with outside dimensions up to
approximately 140mm in multiple modes:
static, orientable mode measures
in six directions, 30 degrees spaced;
partial oscillation mode features
programmable start and stop angle,
eg for squares or flats; and full
180° oscillation (standard mode for
rounds, every 30° rotation delivers a
full profile).
The new EPM method and software, in
High bar gauge for hot rolling mills
The SMO 160-S6