EOW March 2014

wire 2014 show

7-11 April

Additional sales o ces are located in Atlanta, Georgia; Basel, Switzerland; and Taipei, Taiwan. In addition, Phenix Technologies’ representatives are located across the US, and in more than 50 countries. Phenix Technologies – USA Website : www.phenixtech.com

Applications/materials: Stainless steel nickel alloys; resistance/ heating alloys; medical wires, tubes, strips; ne wire for lters, mesh, knitting; aerospace, electronics, oil and gas; electronics materials; copper and copper alloys, superconductor; plating, coating, enamelling and taping; precious metals and jewellery and decorative; titanium, tungsten, tantalum, molybdenum; and welding wires.

The PlasmaANNEALER

▲

Plasmait Stand 10A56-08

PlasmaPREPLATE is a heat and surface treatment machine for heating, cleaning, deoxidation and surface activation for coating, hot dip and electroplating appli- cations. It is used also for electroplating or hot dip tinning of aluminiumwire. PlasmaCLEANER is a plasma surface treatment machine designed for pre- heating, surface cleaning, degreasing or deoxidation on ferrous and non-ferrous wires, tubes or strip. PlasmaGRAPH is graphite degreasing for tantalum, tungsten, molybdenum, or high-speed steel. Plasmait’s solutions are supplied to wire, cable, tube and strip manufacturers and are most bene cial in the applications with demanding surface and material requirements.

Plasmait GmbH – Austria Website : www.plasmait.com

Plasmait is a supplier of heat and surface treatment solutions based on plasma technology for continuous and batch applications in to the ferrous and non-ferrous metals industry. Plasmait will present its range of machines that includes: PlasmaANNEALER is a heat treatment machine for stainless steel, nickel and copper alloys. The machine can be used for various sizes and forms of wire, tube and strand. PlasmaANNEALER is most e ective for high-speed annealing of ne stainless steel, nickel alloy wire in-line with rolling or drawing. PV Ribbon Line for rolling, annealing, tinning of super-soft PV ribbon.

Pourtier Stand: 10E38

➣➢➣ The company will exhibit a concentric strander for four reels, 1,200mm. The COS1200-4 unit is a unique machine which has proven its worth over the last ve years, demonstrating its e ectiveness to reduce operating costs thanks to an ingenious power regeneration system and a reduced Cu/Al consumption. The Pourtier division of Gauder Group has strengthened its range of production with large equipment required for the production of submarine and umbilical cables.

171

www.read-eurowire.com

March 2014