EOW March 2014

wire 2014 show

7 - 11 April

For the solid welding wire industry it supplies complete lines including pay-o s, cleaning equipment, drawing machines, copper coating and take-ups. For tubular wire or ux core wire, it supplies strip rewind lines, strip pay-o s, forming- lling-closing machines, drawing machines and take-ups. Lämneå also supplies high speed rewinding lines including precision layer winders and drum packer (no-twist coiler) for both solid and tubular wire. For the low/high carbon and stainless steel wire industry it is supplying rotating and/ or overhead pay o systems, mechanical cleaning units (for carbon wire), drawing machines and take-ups. The take-up systems range from down coilers with controlled lling systems to automatic spoolers. Lämneå also makes pay-o s and take-up systems for heat and surface treatment of high and low carbon wires as well as stainless steel wires, and take-up coilers with live block or dead block depending on the requirements of the process. Lämneå Bruk AB – Sweden Website : www.lamnea.se

Lämneå Bruk Stand: 09A06

Lämneå Bruk AB specialises in the design and manufacture of machines for the wire industry. At wire 2014 it will launch its new no-twist coiler for spring wire with a speed of up to 40m/s. The no-twist coiler will be equipped with straightening units to make the wire completely straight and twist free prior to the coiling. When coiling, the machine will put a pre-twist in the wire, one per loop wire. When un-coiling from the drum, the twist will be reversed and the wire will come out twist-free and straight. As the wire is uncoiled twist-free and straight there is no need for a driven payo unit or straightening units by the spring coiling line, which means a much more compact line. Additionally Lämneå will get a constant back tension which has proved bene cial in the way that the springs are of consistent and even quality, and less wire consumption per spring. It is also possible to run the no-twist coiler in line with a drawing machine. During the show the machine will run four times each

The no-twist coiler from Lämneå Bruk

▲

day: Mon-Thu, 9.45am, 10.45am, 1.45pm and 3.45pm. Fri, 9.45am, 10.45am, 1.45pm and 2.45pm. For the ferrous and stainless steel wire industry, Lämneå is a supplier of pay- o s, mechanical de-scaling equipment, drawing machines and take-up units.

157

www.read-eurowire.com

March 2014