EuroWire September 2020

Manufacturing Technology

Straighten, cut and chamfer Videx o ers straightening and cut machines for both short and long cut lengths. The short cut models cut from 10mm long and up to one or two metres at speeds up to 1,000 cuts per minute. The new long cut models can cut both short and long parts with an unlimited length.

The company has added an integral high-speed chamfer cutting station to its line of straightening and cut machines. The chamfers are cut dry and the chips are automatically removed from the cutting area into a waste bin, leaving the work area clean and dry.

A positive grip of the parts during cutting ensures a smooth cut face with no vibrations, as well as longer life of the chamfer carbide tips. The gripping system also allows chamfering on one side only, if required. The Videx chamfer system allows short parts to be chamfered down to 90mm long, and the chamfer length is accurate due to a positioning device that locates the bars prior to chamfering. Videx Machine Engineering Ltd www.videx-machine.com ▲ Videx’s VC-25-MS model

Pointed parts

Two-zone gas-heated belt conveyor oven Grieve Corp has produced a gas-heated, two-zone belt conveyor oven that is currently being used to stress relieve heavy-duty steel springs. The unit has a maximum operating temperature of 850°F and workspace dimensions of 48" W x 360" L x 15" H.

The conveyor includes a 4ft-long open belt loading zone, a 2ft-long insulated unheated entrance vesti- bule, two 15ft-long insu- lated heating zones with independent recirculated air- ow and temperature controls, a 2ft-long insulated unheated exit vestibule and a 3.5ft-long open unloading zone. Heat is provided by two modulating natural gas burners that supply 1,600,000 BTU/hr. Two 10,000 CFM, 7.5 hp recirculating blowers provide vertical downward air ow over the workload. All safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment are included on this Grieve oven, which also features a two-pen, 10" diameter circular chart recorder.

Two-zone belt conveyor oven from Grieve

Other construction features include a 42" wide, 1" x ½" atwire conveyor belt with 1/3 hp motor drive; variable speed from 5.8" to 16.1" per minute; 7" insulated walls throughout; a Type 304, 2B nish stainless steel interior; and an exhaust hood over each end of the oven, equipped with a 12" tubeaxial fan driven by a ½ hp motor.

The Grieve Corporation www.grievecorp.com

EF 8/56

www.read-eurofasteners.com

September 2020

Made with FlippingBook Annual report