EuroWire September 2018

67 th IWCS conference

middle and has a slightly conical barrel. This allows each half of the spool to be stacked, meaning up to three times as many spools can be loaded on a trailer.

2000 for precise diameter and ovality measurement of cables and wires, as well as the Centerview 8000, which measures the diameter, ovality and eccentricity of data, automotive and installation cables. In combination with the Ecocontrol 6000 processor system, or at the optionally available integrated display, the measuring values of the Centerview 8000 can be seen in the form of a scatter plot, which clearly shows the distribution of short-term variations of the eccentricity. Other highlights at the stand will include sophisticated devices for quality control of optical bres in the drawing tower. These comprise, for example, gauge heads for measuring bre diameter, temperature, and concentricity of the bre coating, as well as for the detection of lumps and neckdowns on the surface of the coated bre. Sikora AG – Germany Website : www.sikora.net ➣➢➣ Specialising in automatic packaging solutions for the wire and cable industry, Windak Group has o ces in Sweden, USA, Australia and Estonia. Windak will share information about the new QuickPac series of high-speed coiling machines with new exclusive stretch wrap solution. There is no need for a strapper or binder. QuickPac models are designed for maximum output of 9-12 coils/minute. Windak Group Stand: 127

Windak Group – Estonia Website : www.windak.com

Wire & Plastic Machinery Corp Stand: 219

With over 30,000 items of machinery in stock and eight warehouses, Wire & Plastic Machinery Corp is actively engaged in purchasing high-quality used equipment for stock to o er its customers a one-stop selection. The equipment is sold either in its original state or after mechanical and electrical refurbishing, to today’s standards.

Zumbach will o er a complete line of in-line measurement and control equipment for high performance cables, energy cables and similar. The company will explain its software and interface connectivity solutions, ful lling Industry 4.0 requirements and connected within seconds. New one-, two- and three-axis diameter gauges of the high precision ODAC ® series for any wire and cable. New models with special beam geometry, fault detection function and high scan rate • The advanced ODEX ® concentricity and diameter gauge for wire extrusion. Fully non-contact, based on magnetic and laser technology • New LSV length and speed gauges for down-to-zero speed measurement • Advanced KW fault detectors with new local BAE control and display unit • New economic, modular high performance USYS IPC data acquisition, processing and display units • Rayex ® D series: X-ray measuring and control system for CV lines, for wall thickness (three layers), eccentricity and diameter/ovality for CV lines • Pro lemaster ® series: high-end non-contact pro le and shape measurement, combining laser and CCD technology for shaped wire and any other pro le • New line spark tester AC systems with models for up to 15kV, 25kV and 40kV, and cable diameters up to 250mm. Featuring adjustable frequency from 50 to 120Hz, allowing higher operational line speeds to be supported with shorter electrode lengths where needed (UL 1581) Zumbach Electronic AG – Switzerland Website : www.zumbach.com ▲ Zumbach will be exhibiting its dimensional measurement and inspection systems On show will be: •

Tensor SZ strander

▲

A wide range of equipment is available for producing almost all cable types such as bre optic, low-voltage cables, data cable, automotive, power and specialised electrical cables. braiders, capstans, caterpullers, coilers, dancers, extruders (plastic and rubber), extrusion lines, granulators, motors, optical bre equipment, ovens, payo s, preheaters, printers, reels, rewinders, rotating equipment, screws, stripers, strippers, takeups, tapers, testers, tubular stranders, welders and wire drawing. Wire & Plastic Machinery Corp – USA Website : www.wireandplastic.com Categories include barrel packers, binders, bobbin winders,

Zumbach Electronic AG Stand: 234

Zumbach is showcasing its portfolio of dimensional measurement and inspection systems for wire drawing, wire insulating and cable jacketing processes as well as for rod and bar mills. To achieve high precision, di erent technologies such as laser scanning, X-ray, ultrasound, light-section technique and linear sensor technology are used.

Together with co-owner Axjo Plastic AB, the new 360° concept automatic spool assembly machine MP450_3.0 and Axjo’s MultiPac spools will be on display. The MultiPac spool is divided in the ▲ The new 360° concept automatic spool assembly machine MP450_3.0 fromWindak

58

www.read-eurowire.com

November 2012 Sept r 2 8