EuroWire May 2022

Exhibitors

grooves; and electric power consumption on each stand or group of stands. The control of these aspects benefits the rolling mill, with reduced line wear, reduced accidents, higher reliability with less maintenance, and real-time analysis during production. It is also claimed to save on process time, product, control and maintenance cost, with high accuracy and performance. MASSdiscover does not need to be in contact with the product to perform the

mini tolerance for longer product for reinforced steel, or achieve a mini variation on tolerances to ensure high performance post-treatment for fine drawing, cold heading, final product tensile consistency. When the size and speed of material do not match the parameters of the rollers, accidents can occur. ISEND’s new system not only helps to adjust the tolerances but also helps to ensure a good configuration of the production processes: tension adjustments between stands; size variation/wearing of roller

Invimec says that using a tandem rolling mill with a train system is the right solution for all of these production needs. With this equipment it is possible to configure the number of rolling passages; adapt the reduction section to the material; produce a wire without corner or twisting; obtain a wire with constant quality and repeatability; and avoid wire breakage, by means of tension control. Invimec has multiple solutions for different production needs. The com- pany offers the possibility of testing six different tandem rolling mill models; carrying out technical tests on materials (even those that do not lend themselves to being drawn, such as zinc and tin); simulation of the production process; and verifying the result through metallurgical and dimensional analysis. Invimec Srl www.invimec.com ISEND, SA 06 A02 MASSdiscover is a new device that can be used to measure mass flow in real time and, by calculation, the equivalent section or diameter. Using a technology that allows measurements with high precision to make decisions about process control, it has been tested in several rolling mills with harsh conditions.

›››

HFSAB – Cable Repair and Recovery System (CRRS)

• For the safe removal of individual layers including triple layer XLPE insulation up to 220 kV. With a maximum thickness of 25 mm

MASSdiscover for fine-tuning size adjustments on long product rolling mills

• Remove an outer jacket of PE, PVC, HDPE (with or without a bonded smooth aluminium screen) without damaging the layer below, then repairing the cable by re-applying the outer layer

Mass flow measurement is necessary to control production parameters and avoid accidents. To date, expensive systems have been used for production optimisa tion, usually based on laser measurement, vision or other image analysis systems, including electromagnetic technology. These gauges have limitations, as they are designed to control only one point in the production process. ISEND has found a reliable, modular solution to meet the needs of each production line. MASSdiscover is basedon the well-known eddy current technology for long product rolling, giving an electromagnetic signal depending on the fill factor produced in the probe. MASSdiscover can help companies to adjust tolerances in product consistency. Users could, for example, achieve a

• Remove the metallic sheath without damaging the moisture expansion tapes below. Then re-apply the metallic sheath

• Can be installed in an existing Rewind line

• By removing the individual layers the scrap value is far greater than sending a completed cable for scrap.

Join us at the wire 2022 tradeshow on the booth of Machinenfabrik Niehoff GmbH & Co. KG 20 June - 24 June 2022, Hall 10, Booth 10C06

Hall 10, Booth 10C06

H. Folke Sandelin AB Dynamovägen 7, Box 4086 SE-591 04 Motala, Sweden Phone: +46 (0) 141 20 36 30, Fax: +46 (0) 141 20 36 39 hfsab@hfsab.com, www.hfsab.com

115

www.read-eurowire.com

May 2022

CRRS_HFSAB_190x118_wirelogo2022.indd 1

27.04.2022 08:38:47