EuroWire March 2018

wire 2018 show

16 th - 20 th April

and national environmental requirements, coating weights – whether 40g/m² or 900g/m² – or even available space. It is important to be able to produce a high-quality wire product, whether at low DVs of 40 or high DVs of 220 and greater. There is not always one solution to meet these needs so careful consideration is given to deliver a product that can meet expectations. lines that optimise performance. For its environmental lines, the waste products are recyclable. Other lines are available as required. PWT uses materials in its

• Tube forming products for all welded tube applications for steel and stainless steel. These new product lines complement the existing product range for the drawing and rolling of copper and aluminium alloys, as well as the extensive Q8Oils metal manufacturing product range and services. Service-led initiatives include technical and application support, factory visits, product analysis, seminar training

programmes, equipment, system design advice and Q8Oils engineers’ guides, which are endorsed by the health and safety executive. Q8Oils – Belgium Website : www.q8oils.com

QEDWire Lines Inc Stand: 12A30

QED specialises in equipment for in-line heat-treating, cleaning and coating of

➣➢➣

PWT Leetswire – New Zealand Website : www.pwt-leetswire.com

Q8Oils Stand: 11D21

Q8Oils

is

a

European

developer,

manufacturer a comprehensive range of lubricants for the metal industry, and for the drawing, rolling and forming applications of wire, rod, bar, tube, strip and pro les. A specialist range is developed for the metal manufacturing processes of copper, brass, phosphor bronze, beryllium copper, aluminium, aluminium alloy, plated metal, precious metals and stainless steel. The company is committed to the worldwide wire and tube market with product sales in over 90 countries worldwide, from the Americas to Asia, via Q8Oils sta and its network of agents and distributors. To complement the existing Priamus, Wirol And Aludra ranges, four new wire drawing lubricants utilise the latest additive technology to provide enhanced lubrication, meeting all of the latest worldwide environmental legislation. Not only do they reduce the user manufacturing cost, but they are also safe in use. • Conductor grease to prevent corrosion of overhead line conductors made from aluminium, aluminium alloy, steel or multi-metal wires; a cold applied product meeting IEC 61394:2011, EN50326:2002 type 20 A 150 and type 40 A 125. • Increasing the Tantaroll range are new environmentally friendly products for stainless steel ne wire drawing in both medical and non-medical applications, with new products in the selected viscosities of 6, 10, 15, 28 and 36 centistokes. and supplier of Recently launched products include: •

169

www.read-eurowire.com

March 2018