EuroWire March 2016

wire 2016 show

4-8 April

Due to their small size they can be mounted in any cooling line without problems. Rapid Purge cleaning compound : This ready-to-use cleaning compound removes all thermoplastic resin and shortens the cleaning time necessary at colour or material changes. Moreover, it is a cleaning compound which is able to remove burnt material. Rapid Purge works chemically, without admixture of abrasive components. It breaks down the residual plastic polymers into lower-viscous molecules which can easily be ushed out of the machine. This method, which is as smooth as it is e ective, is gentle on the sensitive machine parts. clean and e ective method to clean tools, moulds, dies, parts and surfaces – dry ice does not leave residues behind • robust systems, long lasting – production and techniques from northern Germany • cleaning plants for every business. DCA dry ice blasting plants : • Setic designs and manufactures high quality double twist bunchers/stranders for power cable and automotive industries, as well as complete solutions to produce special/LAN cables with enhanced performances (in one step or two steps according to product mix). The company is continuously developing new lines and concepts for non-ferrous cables in order to meet customers’ needs, such as tandem “mica taping/bunching”, special high-speed lines for battery cable, and new high speed lines for special and instrumentation cables. Setic combined with Pourtier (also a member of the Gauder Group) o er a wide range of twisting/stranding solutions to cable makers. Rolf Schlicht GmbH – Germany Website : www.schlicht-gmbh.de Setic Stand: 10E40

Rolf Schlicht Stand: 12A48

➣➢➣

Rolf Schlicht GmbH, Hamburg, Germany, will exhibit di erent versions of its electrostatic powder coating machines. The machine model RSC was designed to powder cables, wires, hoses and pro les evenly, nely dosed and absolutely dust-free with powders like talc, stearate, varnish powder, swellable powder, graphite, etc.

The DM 105 from Samp

▲

Slipping reduction and the improvement in the quality of gear transmission, bearings and seals result in a reduction of energy consumption by 10-15 per cent and in a consequent improvement of production costs. Die holders have been speci cally designed to improve wire lubrication within the die, to reduce friction and to facilitate the wire cleaning, thereby enhancing the product quality and prolonging the die life. Zirconium oxide pulling rings are used to reach the best possible quality surface of the wire. The Sampsistemi Annealing Platform includes a number of technical features, such as multi-motor technology, adjustable pre-heating length and a wire-walker before contact rings. In addition, the cleaning device on contact rings ensures the integrity of the wire surface and the requested physical properties (mechanical strength, elongation, conductivity and resistance), and maintains the diameter and roundness of the wire. The control system is able to set up production parameters, in particular the kinematic ratio between each axis, in order to form a production recipe stored in the HMI panel. The Annealer Platform is completed with the latest development in annealing technology, in particular the development of the electronic equipment that reduces current distortion (THD-I) and energy waste (PF > 0.90). Also on display will be a Sampsistemi extrusion group for the sheathing of HV cables with a diameter of up to 180mm, with both smooth and corrugated tape. Thanks to its highly innovative structure, this extrusion group allows an important reduction of production costs if compared to traditional methods. This new solution has been developed together with CJ TEK, Samp’s Swiss technology partner for extrusion crossheads, which will be a co-exhibitor, together with Sampsistemi, displaying a number of high-technology, innovative crossheads for many di erent applications. Sampsistemi – Italy Website : www.sampsistemi.it

In the machine there is a fully automatic and maintenance-free lter system which is not cleaned o by blowing in compressed air. Thanks to this lter system a strong and constant vacuum is generated in the machine, so that no powder will escape into the ambient – guaranteed. The machine will be manufactured correspondingly to the extrusion speed and product diameter. Several options are available so that it perfectly ts into the line. Further exhibits on the stand will be: Huestis Air Misers : These have been used for many years in the cable, wire and pro le industry. The air wipes are low noise, dry and highly e cient, and pay for themselves in a short period of time, as the compressed air consumption is very low because of a special construction. Schlicht supplies the Huestis air wipes in sizes from 1.6 to 178mm diameter. Special sizes in rectangular shapes are available on request. They open automatically to allow knots, splices and other oversizes to pass without stopping production or causing damage. ▲ The RSC powder coating machine from Rolf Schlicht

Setic backtwist pairing/quadding, 800mm

▼

154

www.read-eurowire.com

March 2016