EoW May 2008

wire bending & forming

Experience counts at Essebi Essebi, with more than 30 years’ experience, has developed its own technology in cold forming machines. The machines are customised to include all modifications requested by the customer. This is what Essebi calls the ‘easy innovation philosophy’. This philosophy is of continuous development during any time of the customer’s order.

Essebi machines are de- signed to be ‘easy’ and ‘friendly’ for operators, with special care taken to the simplified regulations and the ergonomics of the machine. The same philosophy has been applied to the latest models with fully automatic set up.

A computer controls all the set up and the operation of the machine: the motorised set up of the punches, of the ejection cams and of the die ejection pins, the pre-assembly of the tools on a second die holder and punch holder made on the separate table, on line with the main computer, to which the new set up is immediately transmitted. Essebi Srl – Italy Fax : +39 02 940 0074 Email : sales@essebi-machinery.com Website : www.essebi-machinery.com ‘Easy innovation philosophy’ from Essebi ▲ ▲

F r e e p u b l i c i t y

Include your company in these Special Features: Taping, armouring & sheathing of cables New developments in fibre optics If your company is involved in the above industry sectors, we invite you to participate in these special features by sending in editorial about your machinery or products, for FREE publication in the July 2008 edition. Please send the text as a Word document attached to an email to the address below. Photos should be JPEG 300 dpi and a minimum width of 9cm. Please forward to: Gill Watson – Editor Email : gill@intras.co.uk Tel : +44 1926 334137 Website : www.read-eurowire.com Closing Date: 18 May 2004 losing Date: 16 May 2008

July 2008 Edition

EUROWI RE EUROWI RE EUROWI RE EUROWI RE

64

EuroWire – May 2008