EoW May 2008

wire bending & forming

Automatic wire and strip forming machine

(distance) of the stamping unit against the forming unit centre. The control panel displays the production data, operating speed and the reasons for the machine stopping, should it break down.

The main strength of the Bend 50 CNC machine from Nova-S comes from the separate drives of each of the main sections of the machine – feeding, stamping and forming. The cooperation between all three of the servo motors is controlled by its CNC system. The machine consists of the forming unit, stamping unit, feeding unit with straightener and distribution box with control panel. The machine’s modular construction enables adjustment of the position

The machine’s control system can be set in either produc- tion mode or operating mode which enables die adjustment at low adjusting speeds.

Bend-50 CNC – automatic wire and strip forming machine ▲ ▲

The Bend 50 CNC machine is designed for the precise and high-speed production of the complex parts of spring wire (maximum 4mm diameter) or steel strip (maximum 50mm width). Brass, copper or aluminium materials can also be processed on this machine.

NOVA-S as – Slovakia Fax : +421 34 6242 468 Email : novas@novas.sk Website : www.novas.sk

Electronic straightener from Cometo The electronic straightener from Cometo enables maximum wire straightening process automation. The device provides a rapid straightening process using percentage parameters provided by Cometo itself.

STRE- electronic traverse unit ▲ ▲

The wire straightener can store up to 100 programs to suit specific needs. The device is equipped with step by step motors and an epicycloidal redactor and is driven by an electronic installation supplied with a display, end switch and a sensor for the positioning of the rollers to make scheduling quicker. Cometo Snc – Italy Fax : +39 0341 260927 Email : info@cometo-italy.com Website : www.cometo.eu

58

EuroWire – May 2008