

26 - 30 March
167
EuroWire – March 2012
➣➢➣
wire
2012
show
available to execute the machine, so that
it perfectly ts into your line.
Further exhibits on the stand will be
products from Samp SpA, which Rolf
Schlicht o ers in Germany.
Huestis Air misers will also be on
display, as will Movacolor, the material
throughput
measurement
system
MC-Weight and dosing system MC
Balance. The company will also display its
rapid purge cleaning compound.
Rolf Schlicht GmbH – Germany
Fax
: +49 406 799 4211
:
info@schlicht-gmbh.deWebsite
:
www.schlicht-gmbh.deSchwer + Kopka
Stand: 15H03
Schwer + Kopka will introduce the
new Mandon technology to the
fastener making industry. Mandon is
a completely new operating concept
which supports the machine user
in an unprecedented manner when
analysing and rectifying problems.
Mandon is the logical step forward from
the known Andon information boards
used widely within the industry. The
new Machine Andon – called Mandon – is
an intelligent messaging system which
automatically provides the operator
with important information based upon
continuous observation of all process
data and logical conclusions drawn from
that.
Whenever there is a need for any kind
of intervention, Mandon makes itself
known by prompting the respective
message on the screen of the load
monitor. The know-how for a reliable
messaging system is based on a set of
pre-programmed rules that incorporate
the expert knowledge collected over
many
years.
Mandon-technology
provides the right information to put
measures into e ect immediately, which
leads to more productivity and better
quality.
Mandon gives timely advice to improve
settings: if the software determines,
for example, that the monitoring limits
are set too wide, a message appears on
the screen showing the recommended
setting. All the operator needs to do to
activate the recommendation is to press
“yes”.
Mandon warns in case of critical
conditions, makes recommendations,
informs about technical problems, and
transmits messages for the operator.
Mandon reports productivity losses eg
due to low RPMs, avoids unproductive
times
by
pinpointing
problems
immediately, improves the monitoring
quality, and optimises system utilisation
through permanent technical system
checks.
Schwer + Kopka GmbH – Germany
Fax
: +49 751 561 6410
:
info@schwer-kopka.deWebsite
:
www.schwer-kopka.deSetic
Stand: 10E38
Setic France, a member of the Gauder
Group, designs and manufactures high
quality machines made in France leading
the innovation for optimised wire and
cable production: double twist bunchers/
stranders for the power cable and
automotive industry as well as complete
solutions to produce high quality LAN
cables with enhanced performances
(in one step or two steps according to
product mix).
On the booth, Setic will have a modern
Double Twist Buncher for automotive
application o ering the highest reliability
as well as the lowest operating cost
thanks to the well-known GreenBow
and single bow design. Also, a 1,000mm
Single Twist Cabler will be available to
present its e ciency (900 RPM) and
exibility to produce LAN, control,
instrumentation and special cables.
Upgrading and services departments
will highlight most recent developments
to maintain and improve production
capacity of existing machinery.
Setic – France
Fax
: +33 4 77 71 10 85
:
setic@gaudergroup.comWebsite
:
www.gaudergroup.comShenyang Tianrong
Cable Materials
Stand: 11J73
Established in 1990, Shenyang Tianrong
Cable Materials is a global supplier
▲
High quality machines from Setic