

178
EuroWire – March 2012
26 - 30 March
wire
2012 show
of all the groups with sets as large as
48 wires having been provided to the
industry. Carbide dies and speciality
products are available upon request.
Woodburn Diamond Die Inc – USA
Fax
: +1 260 632 4388
:
info@woodburndd.com:
info@walsonwoodburn.comWebsite
:
www.woodburndd.comWoywod
Stand: 09A42
As a result of constant development the
new Plasticolor 2500 dosing unit with a
capacity up to 150kg/h has been launched.
All free owing materials such as powder,
granules, regrind, akes and agglomerate
can be processed on this unit.
The re-designed material inlet is resulting
in a more precise and constant dosing.
The quick discharge with larger diameter
and the easy action slide is clearly
giving advantages in the handling of
the unit. Optionally this discharge can
be upgraded to a pneumatic operated
version.
The neckpiece slide with larger diameter
allows more coarse materials to ow
without any problems. The screw shaft has
also been modi ed especially for powders
and materials with a high dust content.
In order to protect the motor and
gearbox a newly designed backpressure
protection has been installed. In addition
a three-claw coupling for a better
centring is supplied.
Optionally also an automatic screw
identi cation could be installed which
prevents dosing error by wrong screws.
Woywod Kunststo maschinen GmbH
& Co Vertriebs-KG – Germany
Fax
: +49 898 541 336
:
info@plasticolor.deWebsite
:
www.plasticolor.deWTM
Stand: 11E77
The insulation of electrical wires by
means of tape application and the
production of special twisted cables has
a wide use in the industry of electrical
conductors.
WTM has been operating in the wire and
cable market for 20 years and has earned
a reputation as a specialist in designing,
manufacturing and installing taping
lines, spinning machines, rewinding and
twisting equipment.
Specialised in wrapping technology,
WTM’s range of concentric taping lines
is able to satisfy any request for the tape
application in the production of special
wires and cables.
WTM
machines
fully
meet
the
requirements of the taping process
in di erent production elds, such as:
re resistant/retardant control cables,
conductors for power transformers,
generators and motors, heating cables
and high temperatures wires, low-weight
conductors for aerospace applications,
wires for medical applications, coaxial
cables for high frequency signals
transmission and screened electrical
cables.
The insulation of the wire obtained
by the highly precise application of
any kind of tape by WTM equipment
complies with the strictest rules
applied in many installations such as:
petrochemical installations, transport
facilities,
buildings,
nuclear
plants,
power supply plants, industrial plants,
telecommunication
centres,
tunnels,
mines and military facilities.
In the eld of single stranding machines,
WTM o ers high dynamic performances
thanks to an innovative design and to
the newly-developed fast concentric
back-twist feeders.
WTM
also
manufactures
complete
➣➢➣
▲
The Plasticolor 2500 fromWoywod
▲
One of the machines on display at the WTM stand
➣➢➣