EoW March 2012

wire 2012 show

26 - 30 March

proven successful in applying di erent types of lubricants and nishes. The compact design enables space-saving installation either in-line or in front of production equipment for bolts, rivets, U-shaped staples, etc. The programme is completed by powerful air wipes and a wide variety of spiral brushes with metal and synthetic laments in standard sizes and custom-made versions. The GEO range of equipment consists of a complete range of ultrasonic, high pressure, spray and mechanical cleaning systems for the in-line or o -line cleaning of wire, strip, cable, tube, rod, bar and ultrasonic baths for component cleaning. GEO-Reinigungstechnik GmbH – Germany Fax : +49 25 2 9 5552 91 Email : info@geo-reinigungstechnik.de Website : www.geo-reinigungstechnik.de

sub-assemblies and welded assemblies, bent wire, pipe parts and turned parts. Gersfelder Metallwaren GmbH – Germany Fax : +49 665 496 1940 Email : info@gersfelder-metallwaren.de Website : www.gersfelder-metallwaren.de

➣➢➣

Gimax Stand: 10B18

Priority is given in particular to wet chemical and mechanical cleaning procedures. Besides GEO’s e cient ultrasonic cleaning systems, yielding excellent surface quality even at high processing speeds, the exible wiping system ‘Primary Wire Wipe’ will be of particular interest. The patented Primary Wire Wipe (PWW) is designed to remove visible dust and excessive lubricants from wire and strand or small strips. It is an economical, low-maintenance, environmentally friendly alternative to traditional wipers such as felt pads or pieces of rag. In addition, the PWW has Ultrasonic wire cleaning system – standard series ▲

The Robospira/Robobina from Gimax has had 20 years of success with over 250 machines sold worldwide. Gimax claims that it was the rst company to produce a fully automated respooler, and that it has reached a level of sophistication superior to other currently available respooling solutions. The automated respooling machine does not require an operator for normal operation – everything is done by the machine itself, except for changing the bobbin on the payo when the wire runs out. An operator can generally handle up to ve of these machines, changing

Gersfelder Stand: 16A08

Gersfelder Metallwaren GmbH is one of the leading German makers of

Experience and competence in tapping technique

New standards in tapping technology

Top-Cut Automatic nut tapping machine with bent shank. Suitable for all kinds of standard, flange and round nuts as well as special parts.

Machine

Top-Cut 10 D Top-Cut 16 D Top-Cut 33 D

Thread dimension

M5 – M10

M5 - M16

M16 – M33

Number of spindles

2

2

2

Max. outside diameter of parts Max. width across flats (hexagon nuts)

25 mm

32 mm

60 mm

22 mm

27 mm

50 mm

Power of spindle motor

4 kW

9,7 kW

13,2 kW

Speed range

400 – 5000 rpm 400 – 5000 rpm 200 – 1600 rpm

Max. output (square/ hex nuts)

19.700 pcs/h

19.700 pcs/h

5.950 pcs/h

Max. output (flange nuts)

11.090 pcs/h

11.090 pcs/h

3.530 pcs/h

Visit us at Wire Düsseldorf 2012 Hall 15 Stand A04

Streicher Maschinenbau GmbH Argenstrasse 58/1 88075 Kressbronn/Germany Phone +49-7543/60510 Fax +49-7543/605140 Internet

www.streicher-maschinen.de info@streicher-maschinen.de

eMail

114

EuroWire – March 2012