EoW March 2012

wire 2012 show

26 - 30 March

diameters of ø1.8-2.87mm. The NH01 belongs to Enkotec’s high-capacity NX nail machine series. Enkotec AS – Denmark Fax : +45 865 241 99 Email : info@enkotec.com Website : www.enkotec.com

cost e ectiveness. In-line system with nail machine and thread-rolling machine: Enkotec will also demonstrate its TA01 thread-rolling machine, designed for making screw shank or annular nail pro les with a production speed of up to 2,500 nails per minute. The working area of the TA01 is ø1.8-4.2mm and 32-105mm nail length with a pro le height of 27-76mm. Apart from the high production capacity, the Enkotec TA01 incorporates numerous advantages such as high-quality output, high stability, quick tooling changeovers, simple adjustments, and low noise level. The machine is supplied with a vibratory bowl, a cooling system, and a connection to exhaust ventilation. The machine is capable of running in-line in a nail manufacturing line or as a standalone machine. During the exhibition, the TA01 will be running in-line with an Enkotec high-speed NH01 nail machine, intended for long production runs and producing 2,000 short, uniform nails per minute at lengths of 32-65mm and in wire

interface, which is easy to navigate and allows quick setup of nail parameters. Nail machine with new nail counter- packaging system: An MI01 nail machine will be running together with Enkotec’s new movable stand-alone packaging machine, type NCP02. The system o ers the possibility of in-line nail production in a complete, automated nail manufacturing process. The NCP02 automatically feeds the nail cartons, lls them with the accurate number of nails, and transports the nail cartons via automatic drive belt conveyors. All of this can be done in-line with a standard Enkotec nail machine or thread rolling machine. The MI01 nail machine, intended for small and midsize capacity needs, produces 1,000 nails per minute at ø2.3-3.8mm and nail lengths 50-90mm. The MI01 features simple adjustments, quick tooling changeovers, easy access for cleaning and service, and long tooling life among other advantages. The MI01 combined with its high-end NX series allow Enkotec to o er a complete range of nail machines, where many tooling parts are common for all machine models, thus increasing their

➣➢➣

Erocarb SA Stand: 10D61

Swiss company Erocarb SA has been a global provider of crossheads and tooling for the wire, cable, pipe and tube industries for more than 30 years.

The triple layer crosshead from Erocarb

▲

➣➢➣

107

EuroWire – March 2012