EoW March 2010

wire April 12-16

➣➢➣

on a perfectly intact part of the wire. This is important because it prevents working on the part that the sharpener has worked on which, being very fragile, can easily break and cause the operation to be repeated and production time lost

Tecnosider Stand: 11A62

Tecnovo Srl Stand: 11A62

New products have been developed to keep pace with changes in rod quality and process methods. Tecnolubre FM/262S is a calcium-based soap designed to draw low carbon content wire for welding (CO 2 ). The new lubricant was developed to meet requirements for high-speed drawing of wire rods with very smooth surfaces, which generally creates serious problems for lubricant adhesion on the rst pass and consequently compromises die life and the quality of the nished wire. This new product is recommended in all cases where a very thick lm of lubricant is desired which will guarantee excellent subsequent wet wiredrawing, without compromising later electrocoating treatment. Tecnolubre FM/909 is a sodium-based soap specially formulated to comply with new regulations limiting the use of borax.

Tecnosider has designed a new series of pulling in dogs, named TEK, for easier and better wire drawing. The guiding principle, as with existing Tecnosider pulling in dogs, is to produce an extremely tough instrument, given the heavy duty working conditions under which they are normally used. Special new features of the new model include: Versatility and ease of use: designed • for working on both the left and the right hand side Both pincers open simultaneously • and easily when the lever is operated. The clamps are both tted with special guides Quick and easy replacement of • clamps The wire inserted in the clamps • runs inside the pincer and when necessary can come out of the rear of the pincer through a specially drilled guide. This makes it possible to insert a length of wire long enough to tighten the clamps

TEK from Tecnosider

▲

TEK pulling in dogs are available in two sizes, TEK 15 for 1.2mm to 5.5mm wires, and TEK 28 for 2.7mm to 8mm wires. Tecnosider – Italy

Fax : +39 02 545 5832 Email : tkt@tktgroup.it Website : www.tktgroup.it

➣➢➣

165

EuroWire – March 2010