EoW March 2010

wire

April 12 - 16

➣➢➣ The robustly built and compact Extruder 90mm 25 L/D has a special screw design that produces a high linear output. Dexsen SA – Belgium Fax : +32 4369 3877 Website : www.dexsen.com

The line consists of four models capable of grinding or polishing dies in either manual or automatic cycles to suit any die shop’s requirements. All models feature a slant bed design, easier to use controls, and a lower cost, making it easier to re nish dies in-house. Die Quip’s die working machines are designed to produce tooling in-house to improve material delivery times, reduce tooling costs and provide productivity improvements by increasing die life through better design.

Die Quip uses sound machine designs, time tested work holding methods and build on a rigid platform to consistently make heavy cuts. Die Quip o ers extensive training prog- rammes to teach operators how to run the machines, which tooling to choose and the di erent methods to make dies. This is done with on-site training programmes, detailed manuals and Die Quip’s exclusive Die Making Handbook. Die Quip Corporation – USA Fax : +1 412 835 6474 Domeks new double-head coiling line for high speed coiling and spooling. Quadromatik o ers a wide range of coiling and spooling options. Flexible or multi-core round and at cables from 1x1.5mm 2 up to 4x2.5mm 2 can be packed in coil or spool form. In coil mode, the coil outside diameter can be between 210mm and 400mm, and the height of the coil from 30mm up to 190mm. In spool mode, the outside spool diameter can be between 140mm and 350mm and height of the spool from 40mm up to 250mm. Line speed is 500m per minute for coiling and 400m per minute for spooling. Spools can be of cardboard, metal or plastic. 20-22 micron stretched polyethylene lm is used for xing the end of the cable or wrapping the spool. Domeks’ new palletiser unit can be used at the end of this line for either coil or spool, or both together. It uses 80x120 Euro or 110x110 pallets. Domeks Makine has developed the high-speed Speedmatik 240 for coiling exible single wire and rigid or multi- stranded insulated cables from 0.75mm 2 up to 6mm 2 cables. Line speed is up to 700m per minute. Coil outside diameter can adjusted between 210mm up to 240mm, and coil height from 20mm up to 90mm. Standard polyethylene stretch lm is used for xing the end of the cable onto the coil. The lm is 60mm wide, 20-22 micron thick and 800-1,000m long. has developed a Email : diequip@diequip.com Website : www.diequip.com Domeks Makine Ltd Stand: 10B32

Die Quip Corporation Stand: 9D06-01

Die Quip’s new Die Saver line of die nishing machines for tungsten carbide wire drawing dies will be on show.

122

EuroWire – March 2010